Cart 2 india

Specification
Brand : TRUE CABLE
BulletPoint1 : [Pass Through Design] No more load bars means less waste and frustration. The ability to see the conductors come through the front of the plug allows you to verify the correct TIA 568A or 568B color sequence which minimizes bad terminations.
BulletPoint2 : [Maximum Performance] Ensuring the best cable to plug combination, pass through plugs allow a push-pull method to seat the cable jacket as far into the plug as possible. Triple prong gold plated contacts. Shielded (Internal Ground). Supports Power over Ethernet: PoE/PoE+/PoE++ (IEEE 802.3af/at/bt) 4PPoE up to 100W.
BulletPoint3 : [Versatile] Compatible with 23 and 24AWG stranded or solid conductors. Suitable for cable jacket diameters up to ∅7.00mm and conductor insulation diameters from ∅0.85 - 1.05mm. Terminate with a pass through crimp tool. No need for a separate external ground tab crimper.
BulletPoint4 : [Quality Guaranteed] ANSI/TIA 568 2.D Certified and Validated with trueCABLE F/UTP Ethernet cable. ETL, UL, SGS (RoHS REACH / SVHC) Verified and Tested. FCC compliant.
BulletPoint5 : [Resealable Bag] These shielded pass through RJ45 ends are sure to make your install hassle free.
Color : Cat5e
CompatibleDevices : Router, Server, Modem, Smart TV, Gaming Console, Security Camera
ConnectivityTechnology : Ethernet
ConnectorGender : Male
ConnectorType : RJ45
CustomerPackageType : Standard Packaging
DataTransferRate : 1 gigabits_per_second
ExternallyAssignedProductIdentifier1 : 675595374746
ExternallyAssignedProductIdentifier2 : 0675595374746
Frequency : 250 MHz
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : trueCABLE Cat5e RJ45 Pass Through Modular Plugs, Shielded (STP) Internal Ground Connector, UL Listed, EZ Crimp, Gold Plated 3 Prong 8P8C, 20 Pieces
ItemPackageDimensions_Height : 21.9964 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 10.5918 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : category-5e-ethernet-cables
Manufacturer : trueCABLE
Material : gold
ModelName : DK-1644-150-5
ModelNumber : SMIGPTRJ45_20pc
NumberOfItems : 5
NumberOfLithiumIonCells : 5
NumberOfLithiumMetalCells : 5
PackageLevel : unit
PartNumber : SMIGPTRJ45_20pc
ProductDescription :

Looking for a Cat5e shielded RJ45 plug that is:

Hassle-Free

Well documented

ANSI/TIA 568 Certified

...tested with cable in the real world by installers?

Look no further, as you just found your plug.

Our shielded Cat5e RJ45 plugs are designed to be used with shielded (F/UTP) Ethernet cables, both stranded and solid conductors. The pass-through design is where your frustration level will come down and your success rate will increase. If you’ve ever dealt with the old style push-in or push-in with load bar plugs, then you know what we mean.

After stripping the cable jacket off, wrap the drain wire around the cable jacket and fold the cable shield backward over it. Untwist and comb out the individual conductors. Line up the conductors into the correct T568A or T568B color sequence and push them through the nose of the connector. Everything look good? If the wiring sequence is still correct, now pull. Use the push-pull method to help eliminate kinking of the conductors inside the plug and get the cable jacket up as far as possible into the rear of the connector. Using our Heavy Duty Pass Through Crimp and Termination Tool, crimp and terminate the plug onto your cable. Remove excess foil shielding at the rear of the plug. The conductors are shaved off, and the plug is ready to go. Onto the next one.

With heavy duty thick outdoor shielded cable exceeding ∅6.10mm OD, you will need to gently “ovalize” the end of the cable for the last 0.75” using the oval cutout in small/standard lineman’s electrical pliers. This is to size the end of the cable to fit inside the plug. Don’t crush the cable flat!

Use our 5" flush cutters if you have a crimper that does not shave off conductors.

ProductSiteLaunchDate : 2021-03-20T21:38:49.118Z
RecommendedUsesForProduct : Ethernet network installations, PoE applications, and situations requiring hassle-free termination and maximum performance
Size : 20pc
SpecificationMet1 : RoHS
SpecificationMet2 : ETL
SpecificationMet3 : UL
SpecificationMet4 : TIA
SpecificationMet5 : FCC
SpecificationMet6 : ANSI
StreetDate : 2020-06-22T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 20
UnspscCode : 43202222
Voltage : 51 volts
Wattage : 100 watts