Cart 2 india

Specification
Brand : PZPZP
BulletPoint1 : The traditional intermediate frequency melting furnace needs 20 liters of water to cool in 1 minute, but our cutting-edge design has a powerful effect and only needs 1 liter of water per minute, which is very water-saving.
BulletPoint2 : If you use a water cooler, you only need to add 4 liters of water to circulate and cool it. Friends who have used the portable furnace should know that the machine needs to be melted for 30-60 minutes before it can be melted. If it is used continuously for more than 50 hours, the machine will basically be scrapped. And because our machine has a good water circulation system, it can be melted in 3-5 minutes.
BulletPoint3 : It can work 24 hours to solve the problem of long-term use, and it is more efficient in a wider range of environments.
BulletPoint4 : This product adopts the centrifugal design of heat-resistant tiles, and the temperature of the product does not exceed 30 degrees even if the product is directly fired on the tile machine.
BulletPoint5 : Extensive Application: As an choice for surface treatment, the electroplating rectifier is widely applicable to copper, nickel, chromium, gold, silver, and various plating types.
Color : 1
ExternallyAssignedProductIdentifier : 7503012695170
IncludedComponents : 1* Jewelry Rolling Mill Machine 1* Replaceable Half Slot
ItemName : 1600ºC Intermediate Frequency Gold Melting Furnace Fast Melting Gold And Silver Copper Iron Aluminum Stainless Steel Melting Furnace Water Circulation Crucible Furnace((3KG) Black)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : jewelry-casting-machines
Manufacturer : PZPZP
ModelName : 727105430061
ModelNumber : 727105430061
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 727105430061
PowerSourceType : no
ProductDescription : Power : 5000
Specifications: (1KG) (2kg) (3kg)
Power: 5000 (W)
Specifications: (1KG) orange intermediate frequency melting furnace, (2KG) orange intermediate frequency melting furnace, (3KG) orange intermediate frequency melting furnace, (1KG) red intermediate frequency melting furnace, (2KG) red intermediate frequency melting furnace, (3KG) red intermediate frequency melting furnace, (1KG) black intermediate frequency melting furnace, (2KG) black intermediate frequency melting furnace, (3KG) black intermediate frequency melting furnace

8 major considerations
1. The equipment needs to be cooled by water, please use tap water or clean water circulated by water pumps.
<;45; install the filter at the water inlet. The water outlet pipe cannot be broken or blocked, otherwise the machine will be easily damaged.
3. When the machine suddenly loses power during use, it is necessary to remove the hot pile in time to prevent the machine from being damaged due to high temperature.
4. When the power factor meter suddenly becomes small and unstable, please turn down the power knob, restart the machine or replace it with a new graphite pile.
It is strictly forbidden to start the machine with no load when there is no storage yard; or 5 use different types of non-pure graphite storage yards;
6. The equipment should be kept away from the use environment of strong acid, strong alkali and high temperature.
7. The design of the induction coil requires keeping the inductance of the induction coil within an appropriate range, so as to avoid improper parameters of the induction coil, affecting the heating efficiency, or causing equipment damage.
8. After the operation is completed, keep the cooling water flow and continue to run for 3-5 minutes to ensure that the machine is fully cooled.
Pay special attention to timely take out the graphite pile and quartz sleeve after the melting is completed, so as to avoid the residual temperat
ProductSiteLaunchDate : 2025-02-20T03:17:26.715Z
Size : (3KG)Black
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27000000