Cart 2 india

Specification
Brand : PATIKIL
BulletPoint : Screw Cap. 38 mm with molded hole to accomodate an airlock Perfect for 1/2 and 1 gallon jugs with threaded necks Pack of (12) caps Airlock sold separately
BulletPoint1 : Size: 23mm x 1mm / 0.91inch x 0.04inch (Dia x T); Packing List: 200 x Pressure Sensitive Liners. The outer diameter of the bottle mouth is consistent with the diameter of the product
BulletPoint2 : Advantage: The pressure-sensitive seal which is made of polystyrene foam material effectively avoids dust, moisture and dirt into the jar and prevents leaks and odors in the bottle so that it can keep the dry or powder products fresh at all times. In addition, it can protect your products from tampering securely. No induction sealers or heat shrink bands needed with these liner seals. No tools or heat gun required. This foam seal peels easily from the container When you need to open.
BulletPoint3 : Instruction: 1. Keep the cap where the seal needs to be attached clean, make sure there are no water spots and oily residues.; 2. Put the lettering side of the seal into the cap and apply a little pressure to attach it tightly; 3. Finally, Screw the lid on as tightly as you possibly can, the seal is activated by the pressure of applying the lid and will adhere within 12-24 hours (No Strong Stickiness).
BulletPoint4 : Application: Foam lid liners are coated with a torque-activated coating, after tightening the lid, they can be adhesive to glass, plastic and metal jars, as well as round containers with metal or plastic lids and closures.
BulletPoint5 : NOTE: 1. Please make sure the right size you need before ordering. 2. Once the seal is removed, the tightness will be affected when reused. 3. These pressure-sensitive liners are best used with powder or dry products, not suitable for applications containing oil; Avoid overfilling the container. 4. It is recommended to wait enough time before removing the cover after installation. 5. These PS foams are not suitable for use at high temperatures.
Color : White
ExternallyAssignedProductIdentifier1 : 0651208965396
ExternallyAssignedProductIdentifier2 : 651208965396
GpsrSafetyAttestation : 1
IsMicrowaveable : 1
ItemDisplayDimensions_Height : 1 millimeters
ItemDisplayDimensions_Length : 23 millimeters
ItemDisplayDimensions_Width : 23 millimeters
ItemName : PATIKIL 23mm/0.91" Foam Lid Liner, 200 Pack Adhesive PS Foam Lid Liner Pressure Sensitive Seal Cap Liners Resistant Tamper for Plastic Glass Jar Bottle Cap Seals
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 8
ItemShape : Round
ItemTypeKeyword : science-lab-glassware-labware-caps
Manufacturer : PATIKIL
Material : PS
ModelNumber : pta220916tt0488eu
NumberOfBoxes : 1
NumberOfItems : 12
NumberOfPieces : 200
PartNumber : pta220916tt0488eu
ProductDescription : Foam lid liners are coated with a torque-activated coating, after tightening the lid, they can be adhesive to glass, plastic and metal jars, as well as round containers with metal or plastic lids and closures.

Specification:
Color: White
Material: PS (Polystyrene)
Size: 23mm x 1mm / 0.91inch x 0.04inch (Dia x T)
Packing List: 200 x Pressure Sensitive Liners

Advantage:
Keep Fresh: The pressure-sensitive seal which is made of polystyrene foam material effectively avoids dust, moisture and dirt into the jar and prevents leaks and odors in the bottle so that it can keep the dry or powder products fresh at all times. In addition, it can protect your products from tampering securely.
EASY to USE: No induction sealers or heat shrink bands needed with these liner seals. No tools or heat gun required. This foam seal peels easily from the container When you need to open.

Instruction:
1. Keep the cap where the seal needs to be attached clean, make sure there are no water spots and oily residues.;
2. Put the lettering side of the seal into the cap and apply a little pressure to attach it tightly;
3. Finally, Screw the lid on as tightly as you possibly can, the seal is activated by the pressure of applying the lid and will adhere within 12-24 hours (No Strong Stickiness).

NOTE:
1. Please make sure the right size you need before ordering.
2. Once the seal is removed, the tightness will be affected when reused.
3. These pressure-sensitive liners are best used with powder or dry products, not suitable for applications containing oil; Avoid overfilling the container.
4. It is recommended to wait enough time before removing the cover after installation.
5. These PS foams are not suitable for use at high temperatures.

ProductSiteLaunchDate : 2022-11-03T11:07:40.987Z
Size : 23mm/0.91"
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24122000