Cart 2 india

Specification
Brand : SparkFun
BulletPoint : 8 Key CAP1188 Capacitive Touch Sensor Module SPI I2C Captouch Sensor w/LEDs 8 Button / Key Interfaces DC 3V-5V for Arduino DIY
BulletPoint1 : When proximity switch is close to some target object, it will send out control signal.
BulletPoint2 : It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
BulletPoint3 : It's widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial .
BulletPoint4 : Besides, EM310-UDL equips with 3-axis accelerometer to detect the status of container cover
BulletPoint5 : Distance & Level, Sensors
Color : Sliver&yellow& Gray
ConnectivityTechnology : I2C
ExternallyAssignedProductIdentifier : 4712414391525
ExternallyAssignedProductIdentifier1 : 0731717891284
ExternallyAssignedProductIdentifier2 : 731717891284
ExternallyAssignedProductIdentifier3 : 00743270157530
ItemName : SparkFun Capacitive Touch Breakout - AT42QT1010
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 11.5 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : capacitive-proximity-sensors
Manufacturer : Electronics123.com, Inc.
Material : Plastic
ModelNumber : 5cad7c7c87601a6c1a771935de746e
NumberOfItems : 1
PartNumber : SEN-12041
PowerSourceType : ac/dc
ProductDescription : If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single, momentary capacitive touch button with easy-to-use digital I/O pins.

The AT42QT1010 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch. As long as a touch (e.g., from a finger) is detected, the AT42QT1010 keeps the output line high. Otherwise, the line is kept low. You just need to provide a power source (1.8V–5V) and ground for the AT42QT1010 to work. Additionally, a PAD pin is available if you would like to create your own external electrode.

Unlike its sibling, the AT42QT1010 does have an internal time-out of about 60 seconds, meaning that if you hold your finger to the breakout’s pad for any length of time after that, the board will turn itself off. The difference between the AT42QT1010 and the AT42QT1011 is small but may be a game changer depending on your project’s uses.

Documentation and Download Links:

Schematic: http://www.electronics123.net/amazon/datasheet/AT42QT101X_Capacitive_Touch_Breakout.pdf

Eagle Files: http://www.electronics123.net/amazon/datasheet/AT42QT101X_Capacitive_Touch_Breakout_1.zip

Datasheet (AT42QT1010): http://www.electronics123.net/amazon/datasheet/40001946A.pdf

Hookup Guide: https://learn.sparkfun.com/tutorials/at42qt101x-capacitive-touch-breakout-hookup-guide?_ga=2.77552277.1656141240.1533219019-2084303853.1533219019

Github: https://github.com/sparkfun/AT42QT1010_Capacitive_Touch_Breakout
ProductSiteLaunchDate : 2018-08-03T07:00:00.000Z
Size : Small
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3.986
UnspscCode : 43211500
Voltage : 24 volts