Capacitive Touch Switch Module 2-5.5V Low Power Mode with Green LED Indicator, Easy Installation for Replacement

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 1800/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
AgeRangeDescription : adult
Brand : Garosa
BulletPoint : Current Sensors
BulletPoint1 : Both the front and the back can be used as a touch , which can replace the traditional touch button.
BulletPoint2 : Capacitive touch switch module, the initial state is low level, touch is high level, and no touch is low level.
BulletPoint3 : When there is no touch for 12 seconds, the mode switches to low power mode, saving energy.
BulletPoint4 : 2-5.5V power supply, 4pcs M2 screw positioning holes for easy installation.
BulletPoint5 : The green LED power indicator lights up when it is powered on correctly and is easy to use.
Color : Dc 3 Wire Npn Nc
ConnectivityProtocol : X-10
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 9140028636728
ItemName : Capacitive Touch Switch Module 2-5.5V Low Power Mode with Green LED Indicator, Easy Installation for Replacement
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : capacitive-proximity-sensors
Manufacturer : Garosa
Material : Copper
ModelName : Garosauozygf2wbh
ModelNumber : Garosauozygf2wbh
MountingType : Flange Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Garosauozygf2wbh
ProductDescription : Spec:
Condition: 100% Brand New
Item Type: Sensor Module
Power Supply: 2-5.5V
Item Minimum Valve Typical Value Maximum Value Unit
Power Supply Voltage VCC 2 3 5.5 V
Output High VOH - 0.8VCC - V
Output Low VOL - - 0.3VCC V
Output Pin Sink Current (at VCC=3V, VOL=0.6V) - 8 - mA
Output Pin Pull-up Current (at VCC=3V, VOH=2.4V) - -4 - mA
Response Time (Low Power Mode) - - 220 mS
Response Time (Fast Mode) - - 60 mS
Product Size Approx. 24 x 24 x 7.2 mm / 0.9 x 0.9 x 0.3 in mm
Weight Approx. 14g / 0.5oz g Control Interface: A total of 3 pins (GND, VCC, SIG), GND is connected to ground, VCC is connected to the power supply, SIG is the digitaloutput pin
Power Indicator: Green LED, it will light up when it is powered on correctly
Touch Area: The internal area of thesimilar to the fingerprint

Package List:
5 x Module

ProductSiteLaunchDate : 2024-03-02T17:01:57.933Z
Size : One Size
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.