Cart 2 india

Specification
Brand : Adafruit
BulletPoint1 : Product Name : Capacitive Proximity Switch; Model : LJC18A3-B-Z/BY; Wire Type : DC 3 Wire Type (Brown, Black, Blue); Switch Appearance Type : Cylinder Type
BulletPoint2 : Theory : Capacitance Sensor; Output Type : PNP NO(Normal Open); Diameter of Head : 18mm; Detecting Distance : 1-10mm
BulletPoint3 : Detecting Object : Metal or Nonmetal Material; Supply Voltage : DC 10-30V; Current Output : 200mA; Response Frequency : 100Hz
BulletPoint4 : Operating Temperature : -25 to +65 Celsuis (Non-freezing Condition); Size : 7.5 x 3cm / 3"x 1.2"(L*Max. Dia); Cable Length : 120cm/47"; External Material : Plastic, Alloy
BulletPoint5 : Net Weight : 114g; Package Content : 1 x Capacitive Proximity Switch
Color : Blue
ConnectivityProtocol : X-10
ConnectorType : solder
CurrentRating : 0.2 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 711978444528
ExternallyAssignedProductIdentifier2 : 0711978444528
FinishType : Copper
InputVoltage : 5.5 volts
InternationalProtectionRating : IP54
ItemName : Adafruit Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012 [ADA1375]
ItemPackageDimensions_Height : 0.254 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 2.54 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : capacitive-proximity-sensors
Manufacturer : Adafruit
Material : copper
Material1 : Plastic
Material2 : Metal
ModelNumber : 1375
MountingType : Surface Mount
NumberOfItems : 1
NumberOfPorts : 1
NumberOfPositions : 2
OperatingVoltage : 250 volts
OperationMode : Automatic
PartNumber : ADA1375
ProductDescription : This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor. This sensor is a toggle output type: touch-on then touch-off. That means that when a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED will alternate turning off and the output pin will go high or low, respectively. This sensor is good for a project where you want to activate something on the first touch, then deactivate it when touching again, like a switch. You can also solder a wire to the middle pad and create your own capacitive pad if the built-in one isn't suited to your project. If you want to save power, the LED can be disconnected from the output pin (cut the trace between the jumper marked as such). We designed this breakout to have infinite time-out. The chip does support having the sensor time-out, so for example, if something is turned on, it will eventually turn off on its own. If you'd like to use this mode, cut the TIMER jumper and then connect a resistor/capacitor to the TIME pin. Check the datasheet for how to calculate the TIME pin to match your desired timeout. Comes with a fully assembled board, and a small stick of 0.1" header so you can solder and plug it into a breadboard. For additional contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout
ProductSiteLaunchDate : 2015-05-19T11:10:40.917Z
SpecificationMet : Ip67
SpecificUsesForProduct : Electronic projects
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Temperature Switch
UnitCount : 1