Cart 2 india

Specification
Brand : GOTOTOP
BulletPoint : Digital LC100-A LCD High Precision Inductance Capacitance L/C Meter Tester + USB Cable
BulletPoint1 : [Safety First] Multifunctional electronic detector can test the system to ensure household safety.
BulletPoint2 : [Time saving] Saves a lot of time when checking socket problems, small and portable, suitable for electricians.
BulletPoint3 : [Wide Application] Widely applicable for electrical maintenance in schools, laboratories and factories, office socket testing, switch panel testing and wall socket testing.
BulletPoint4 : [Quick error detection] The socket tester can quickly detect the correct electrical connection of the socket.
BulletPoint5 : [ measurement] With LCD display, frequency, phase voltage (L_N) and current voltage (N_E) can be measured accurately.
IncludedComponents : No
ItemName : Socket Tester Electrical Tester Multifunctional with LCD Display, Diagnostic Plug, Automatic Circuit Polarity Detection, for Household, Office and Panel Testing
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : capacitance-meters
Manufacturer : GOTOTOP
MeasurementAccuracy : 0.1mm
ModelName : GOTOTOPt76zegvpk4
ModelNumber : GOTOTOPt76zegvpk4
NumberOfItems : 1
PartNumber : GOTOTOPt76zegvpk4
ProductDescription : Specification:

Item Type: Socket Tester
Material: ABS
Main Functions: 3-pin socket line sequence detection, phase voltage detection (L_N), detection of the Leakage voltage (N_E), leakage switch (RCD) detection.
Working voltage: 90-250V, 45-65Hz
Phase voltage measurement range: 90-250V, 45-65Hz, Accuracy: ± (2.0 % + 2).
Leakage voltage measurement range: 0-99V/45-65Hz, Accuracy: ± (2.0% + 2).
Working temperature: 0℃-40℃
Working humidity: 20%-75% relative humidity
Storage temperature: -10℃-50℃
Storage humidity: 20%-80% relative humidity
Altitude: ≤2000 meters
RCD current : >30mA
RCD working voltage: 220V ± 20V
GFCI test: >5mA
GFCI working voltage: 110V ± 20V (earth fault current ; it is a special device for the North market)
How to use:
Plug the tester into a standard 3-hole socket. If an error is detected in the wiring order of the outlet, the red backlight will illuminate to indicate a wiring error. Then observe the display and the function comparison table to determine which type of outlet wiring is incorrect, then unplug the tester from the outlet. If you find that the wiring is incorrect, please a professional electrician to repair the wiring.
Red Red Red
Correct ● ● ○
Missing ground ● ○ ○
Missing neutral line ○ ● ○
Missing live wire ○ ○ ○
Live and ground reverse connection ○ ● ●
Reverse connection between live and neutral lines ● ○ ●
Power - and ground cables are connected reversed, no ground ● ● ●



Package list:
1 x socket tester
1 x manual




ProductSiteLaunchDate : 2024-05-15T17:38:53.376Z
UnspscCode : 41113600