Cart 2 india

Specification
Brand : Respicefinem
BulletPoint : Type:Other
BulletPoint1 : Multi-purpose: This transistor tester ESR02 Pro provides comprehensive test functions for resistors (0Ω50Ω with 0.01 Ohm resolution), capacitors (25pF100mF with 1pF resolution), inductors (0.01mH~20H with 0.01mH resolution), as well as detailed measurements (with 0.01Ω resolution) to simplify your electronic component analysis
BulletPoint2 : Efficient, user-friendly interface: The transistor tester starts testing by simply pressing the POWER/TEST button, and automatically shuts down after 20 seconds of inactivity, saving battery life. Intuitive display identifies component function for each pin after measurement
BulletPoint3 : Adaptive Socket Design: The transistor tester is equipped with three multi-function sockets with pins 1, 2 and 3 interconnected to accommodate a wide range of component sizes without strict sequencing requirements for increased usability
BulletPoint4 : Built-in calibration: The transistor tester is easily calibrated by simply shorting test pins 1, 2 and 3 together and following the on-screen prompts, ensuring consistent accuracy of measurements
BulletPoint5 : Convenient Reference Guide: This transistor tester includes a rear-mounted “Typical Values for Electrolytic Capacitors” chart that serves as a handy guide to standard values at room temperature
Color : #711
IncludedComponents : No
ItemName : ESR02 Pro Digital Transistor SMD Component Tester Professional Inductance Capacitance Meter for Accurate Electronic Diagnostics
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : capacitance-meters
Manufacturer : Respicefinem
MeasurementAccuracy : 0.1mm
ModelName : Respicefinemoi3tasrgnv
ModelNumber : Respicefinemoi3tasrgnv
NumberOfItems : 1
PartNumber : Respicefinemoi3tasrgnv
ProductDescription : Specification:
Model: ESR02 Pro
Resistor: 0Ω~50Ω, Resolution: 0.01 ohm
Capacity: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitor Resolution: 0.01Ω
Battery: 1pcs x 9V 6LR61 Battery (NOT included)
Color: black
Size: Approx. 14*8*4.5cm/5.5*3.1*1.8inch
Weight: Approx.214g/7.5oz

Using Instruction:
Push POWER / TEST to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement.
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.
The placement of the device does not require the order of instruction, and the screen displays the component function of each pin after measuring.
There is a table typical value of electrolytic capacitor at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.

Calibration:
Short the test pin 1, 2, 3 together and push POWER / TEST button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm. Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.

Package List:
1 x Transistor Tester
1 x User Manual

Note:
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
If using DC supply, please choose DC 9V~12V adapter. (including 9V and 12V)
Can be powered by a 9V 6LR61 battery (NOT included), when the battery power is under 6V, please replace a new one.





ProductSiteLaunchDate : 2024-09-02T03:29:28.083Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41113600