Cart 2 india

Specification
Brand : Dixon
BulletPoint : Sold on Amazon
BulletPoint1 : Cam lock cam-and-groove adapter (plug)
BulletPoint2 : 2 inch
BulletPoint3 : Max working pressure @72°f: 145 psi
BulletPoint4 : Country of origin: China
BulletPoint5 : On the coupler side of the Maxi-Dry, the handle is extended over the cam, to make sure that the coupler and adapter cannot be separated when the flow is opened
Color : Stainless Steel
ConnectorType : Male Adapter
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier1 : 840194123044
ExternallyAssignedProductIdentifier2 : 0840194123044
ExternallyAssignedProductIdentifier3 : 00840194123044
IncludedComponents : fitting
ItemDisplayWeight : 2.95 pounds
ItemName : Dixon Reducing Cam and Groove Female Coupler x Male Adapter, 356T6 Aluminum - 3" x 4"
ItemPackageDimensions_Height : 10.16 centimeters
ItemPackageDimensions_Length : 5.08 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemShape : adapter
ItemTypeKeyword : camlock-hose-fittings
Manufacturer : Dixon
Material : Aluminum
ModelName : CamSocket-Cap200
ModelNumber : CamSocket-Cap200
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 3040-DA-AL
ProductDescription : WARNING : Under no circumstances should cam and groove couplings be used for compressed air or steam service.

Dixon Reducing Cam and Groove Female Cam Coupler x Male Cam Adapter for transitioning sizes between two camlock fittings. These camlock fittings are available from 1-1/2" up to 4" in 356T6 Aluminum or 316 Investment Cast Stainless Steel. The pressure rating for these fittings is based on the seal of the mating part.

Note: The 4" x 2" (4020-DA-SS) stainless steel fitting is produced as a welded fabrication.

Dixon camlock fittings are all precision machined to rigid tolerances and designed to be interchangeable with all products produced to Commercial Item Description A-A-59326B. However, no standard exists for the 1/2" and 8" fittings and generally these will not interchange with other manufacturers. All couplers, regardless of casting material, utilize durable stainless steel cam arm pins that will not rust or bind. The couplers also feature a recess to hold the gasket firmly in place, ensuring proper placement and eliminating any chance for leakage.

Cam and Groove fittings are designed for use as a hose coupling that allows quick connect capabilities to increase operator productivity. To secure a connection, simply slide the adapter into the coupler, and with normal hand pressure press the cam levers down. Uncoupling is just as simple, just lift the cam arms and remove the adapter. Dixon also offers Dust Plugs and Dust Caps to keep hoses and process tubes clean while fittings are disconnected.

Dixon Cam and Groove Fittings Features:

- Precision Machined
- Rigid Tolerances
- Recessed Gasket Slots
- Buna N Seal Standard (alternates available)
- Stainless Steel Cam Arm Pins
- Interchangeable with most manufacturers
ProductSiteLaunchDate : 2016-12-02T21:42:39.045Z
SafetyDataSheetUrl : http://catalog.ptcoupling.com/viewitems/dry-disconnect-couplings/mda-maxi-dry-adapter-adapter-x-female-npt-thread-? ; http://ptcoupling.stage.thomasnet-navigator.com/Asset/Recommended-Operating-Conditions.pdf
Size : 2
StreetDate : 2017-03-02T00:00:01Z
Style : Coupler x Cap / Stopper
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700