Cart 2 india

Specification
Brand : FUCUNN
BulletPoint1 : Solid Connection: Use a heat gun to apply heat evenly.Keep rotating wire or heat gun. Do NOT concentrate heat in one spot too long.The solder connectors melt and seal around the wire.Let the solder seal wire connectors fully cool before tugging on it.These solder butt connectors make nice tight connections.
BulletPoint2 : Waterproof Solder Connectors: The heat shrink solder connectors are made of PE heat shrinkable tube and low temp solder ring.No need extra solder or heat shrink tube.Shrink down in size once heated and take up less space than traditional splicing methods.
BulletPoint3 : Self Solder Butt Connectors:User-Friendly Design: Inner diameter of the smaller side: 0.17"(4.5mm),Bigger side: 0.24"(6.1mm).Slightly twisted the bare wire and slide over the smaller end of tube first,then overlap the bare wires and slide over the larger end of tube,until the solder ring siting in the center of the joint .
BulletPoint4 : Wide Application: The solder seal wire connectors are designed for wire repair,suitable for automated equipment,power control system,IT communication,computer,scientific research, security monitoring equipment ​and more.Take it for your electricians/technicians/mechanics in the workshop and make their work easier!
BulletPoint5 : 12 Months Warranty:The self solder heat shrink butt connectors are compliant with ROHS, SGS, and CE standards.We offer our customers 12 months warranty,which ensures risk-free purchases!
BulletPoint6 : Accuracy: ±2.5℃ or ±0.75％
BulletPoint7 : Made in the USA from Imported Materials in Minnesota
Color : Blue
ConnectorType : Solder Seal Butt Connectors With Heat Shrink
CurrentRating : 150 amps
ExternallyAssignedProductIdentifier1 : 744337491000
ExternallyAssignedProductIdentifier2 : 0744337491000
IncludedComponents : J-Type Thermocouple
ItemName : 160pcs Solder Seal Wire Connectors,Heat Shrink Solder Connector 16-14 Gauge, Blue Self Solder Heat Shrink Butt Connectors,Waterproof Solder and Seal Connectors,Self Soldering Terminal for Wire Repair
ItemPackageDimensions_Height : 12.2936 centimeters
ItemPackageDimensions_Length : 12.0904 centimeters
ItemPackageDimensions_Width : 12.0904 centimeters
ItemPackageQuantity : 1
ItemShape : Cylinder
ItemTypeKeyword : butt-terminals
Manufacturer : FUCUNN
Material : Copper
MaximumVoltage : 220 volts
MeasurementSystem : Inch, Metric and Number Gauge
ModelNumber : 6-Pole 5mm Pitch
NumberOfContacts : 10
NumberOfItems : 1
NumberOfPoles : 10
OperatingVoltage : 600 volts
PartNumber : ZFK-SST-BL-LB
ProductDescription : Solder Seal Wire Connectors Heat Shrink for Wire Repair

How to Use?
Step 1: Use a wire stripper to strip insulator from the ends of both wires.
Make sure the copper is nice and clean (shiny).
Step 2 : One side of the connector is bigger than the other,so slip the small end of connector on the wire first.
Step 3 : Push the wire strands together so them intertwine with each other.
Slide the larger end of the connector over the joint until the solder ring in the center.
Step 4: Turn on a heat gun.
Wait until the heat gun rises to 455°F~491°F (235°C~255°C), then put the heat gun 1.18 inch away from the splice.
Step 5 : Heat the solder area first,then heat the tubes...
Keep rotating wire or heat gun around to keep them heated evenly.
You will see the solder melt and make a reliable soldered connection between the wires.
Step 6 : Let it fully cool down before tugging on it.

Warm Note:
1.It requires more heat to melt the solder.
2. Theses connectors Must be used with a heat gun to work properly.
3. No crimping tool needed.
4. Please do NOT have the heat source too close to the wire or concentrating that heat in one spot too long,
otherwise the insulation on the wire may start to melt or bubble.

Caution:
1. Avoid using it on heavy current-draw appliances.
2. Do NOT wiring in tight places.
3. Do NOT use lighter as heating resource.
4. Please use in the circuit with Maximum working power of 2.5KV, Maximum
voltage of 600V, and Maximum current of 5mA.


ProductSiteLaunchDate : 2021-07-23T14:23:34.284Z
Size : 16-14 Gauge Blue Solder Connectors
SpecificationMet1 : RoHS
SpecificationMet2 : SGS
SpecificationMet3 : CE
StudSize : 16-14 Gauge
Style : 16-14 AWG Solder Seal Wire Connectors Heat Shrink
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureRating : Shrink Temperature: 240°F ; Solder Melt: 320°F
TerminalType : Butt Terminal
UnitCount : 10
UnspscCode : 39121400
Voltage : 12 volts