Cart 2 india

Specification
Brand : Dixon
BulletPoint : Price for Pack of 3 pcs
BulletPoint1 : ♥ 304 Stainless Construction and High heat compatible silicone gaskets.
BulletPoint2 : ♥ Go weldless with thermowells, ball valves and more.
BulletPoint3 : ♥ This stainless steel bulkhead is 1.5"/2'' NPT with a flat, thick rubber washer that makes is very easy to install on most kettles.
BulletPoint4 : ♥ Package includes: 1 x Stainless Steel Weldless Bulkhead.
BulletPoint5 : ♥ The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
Color : Stainless Steel
ConnectorType : Flanged
ConnectorType1 : Adapter
ConnectorType2 : Union
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 6939799784843
ExternallyAssignedProductIdentifier1 : 0089109836260
ExternallyAssignedProductIdentifier2 : 089109836260
FitType : Vehicle Specific
IncludedComponents : Bulkhead Panel
ItemName : Dixon Valve 12-DBHU-12, Instrumentation 3/4" Tube OD Bulkhead Union (Pack of 3 pcs)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 3
ItemTypeKeyword : compression-bulkhead-fittings
Manufacturer : Dixon Valve
Material : Stainless Steel
ModelName : Bulkhead Panel
ModelNumber : 155070411
NumberOfBoxes : 1
NumberOfItems : 3
PackageLevel : unit
PartNumber : 12-DBHU-12
ProductDescription :

Applications

• Applications include: high pressure, high temperature, nitrogen, helium, flammable gases, hydraulic gases and corrosive media.

Features

• Double collet (ferrule) swaging action
• Two positive seal points

Construction

• ASTM material construction
• 316 stainless steel

Compatibility & Interchange Data

• Fully interchangeable with Swagelok® and Parker A-Lok® fittings

Installation

• Cut tubing squarely and clean tube end thoroughly to remove burrs.
• Insert tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight.
• Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.

Note

• Instrumentation fittings come completely assembled.

Safety notes

• Never connect, disconnect or remake a fitting with pressure in the system.
• Make sure all fittings are properly installed.
• It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm.
• For proper sealing it is recommended that the tubing and fittings be of like material.
• Always use proper thread lubricant and sealants on tapered pipe threads.
• Never bleed a system by loosening a fitting.

ProductSiteLaunchDate : 2020-10-23T13:04:49.776Z
Size : ODX64MM
Style : Weldless
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
WebsiteShippingWeight : 1 pounds