Cart 2 india

Specification
Brand : Precision Marine
BulletPoint1 : Our heavy duty bulkhead fittings are thicker than standard schedule 40 pvc fittings. This makes the bulkhead more durable than thinner bulkheads.
BulletPoint2 : All of our bulkheads use UV stabilized, epdm gaskets, resisting wear and weathering if exposed to sunlight and outdoor elements.
BulletPoint3 : All of our bulkhead fittings have tapered sockets, which allows our fittings to accommodate any brand of pipe, as they can be differ slightly.
BulletPoint4 : All of our bulkheads are Made in America. We've been serving the trade for 26 years. Any questions? We're here to help.
BulletPoint5 : Popularly used with rdwc Growing Systems, Aquariums, Outdoor Holding Tanks, Sumps and Reservoirs. Recommended for 1/8” wall thicknesses and up. Use a 3 inch hole for a perfect fit.
Color : Black
ConnectorType : Threaded
ExteriorFinish : PVC
ExternallyAssignedProductIdentifier1 : 0630128141615
ExternallyAssignedProductIdentifier2 : 630128141615
ItemName : 2 Inch Bulkhead Fitting 8/Pack - Thread x Thread – Heavy Duty Premium Bulkheads – Made in the USA - RDWC - Aquariums - Sumps - Holding Systems - Rain Barrel - Hydroponics Systems
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 9 inches
ItemPackageQuantity : 1
ItemShape : flange
ItemTypeKeyword : compression-bulkhead-fittings
Manufacturer : Precision Marine Systems, Inc.
Material : Polyvinyl Chloride
Material1 : Stainless Steel
Material2 : Polypropylene
ModelNumber : BF200
NumberOfItems : 8
NumberOfPieces : 8
PartNumber : BF200
ProductDescription : All of our bulkhead fittings have female openings on both sides. This is where you will make your connections. The differences are how you attach your fittings or pipe to them. First we need to understand the terminology. SLIP is a common term when referring to bulkheads. The proper PVC term is Socket (SOC), which is a fitting end type that allows pipes to slip into fittings to make a connection. To make the connection permanent and water-tight, PVC cement is required. When referring to Bulkhead fittings, the two terms are synonymous. THREADED is a type of connection on pipes and fittings. All of our Threaded bulkhead fittings have FEMALE pipe threads which requires you to use a MALE fitting. Examples of Male fittings include Male Adapters, PVC Nipples, Threaded Street Elbows, etc. Depending upon how you’re configuring your plumbing will determine which male fittings you will use. There is a lot of flexibility with threaded connections as they are not permanent. We think slip (glued) connections are the most reliable, but both will work. When we discuss a Bulkhead Fitting’s connection we will ALWAYS refer to the FLANGE end FIRST. Bulkhead options are: - Slip x Slip Slip on both ends. Requires you to use Spigot (commonly referred to as SLIP) fittings or PVC pipe on each end of the bulkhead. PVC cement is required for a water-tight seal. You can glue any type of Spigot fitting, including a Spigot reducer if you require a smaller size on one end. - Thread x Thread Female pipe threads on both ends. - Thread x Slip Female pipe threads on the flange end and slip on the “nut” end. - Slip x Thread Slip on the Flange end and female pipe threads on the “nut” end. All of your fittings need to be attached to the inside of each side of the bulkhead. The threads on the outside of the bulkheads will not fit any kind of PVC threads, These threads are for the retaining nut to thread on to and tighten the bulkhead when installing.
ProductSiteLaunchDate : 2019-03-04T08:00:00.000Z
Size : 2 Inch
UnitCount : 8
UnspscCode : 40141700