Cart 2 india

Specification
Brand : TAMROD HOLDINGS LLC
BulletPoint1 : 2” x 28” Leather Honing & Polishing Belt/Strop – Buffing Compound Included. Belt fits Harbor Freight/Bauer 8" Bench Grinder and Belt Sander.
BulletPoint2 : Premium White Diamond Buffing compound and instructions included. The White Diamond is a precision finishing compound which has a micron grade of 1, a micron range of (0-2), and a mesh equivalent of 14,000
BulletPoint3 : Every 2” x 28” Leather Belt we produce is tested to ensure proper fit before leaving our shop.
BulletPoint4 : Proudly Hand-crafted in Austin, TX USA
CompatibleMaterial : Leather
ExternallyAssignedProductIdentifier : 00850048620216
IncludedComponents : Leather Honing Strop and Buffing Compound
ItemName : 2" x 28" Leather Honing & Polishing Belt/Strop
ItemTypeKeyword : buffing-kits
Manufacturer : Leatherbeltman
Material : Leather
ModelName : LBM 2x28
NumberOfItems : 1
PartNumber : LBM2x28
ProductDescription :

Leatherbeltman 2" x 28" Leather Honing Belt with buffing compound. Belt is designed to run on Harbor Freight/Bauer 8" Bench Grinder with Belt Sander.

Premium White Diamond Buffing compound and instructions included. The White Diamond is a precision finishing compound which has a micron grade of 1, a micron range of (0-2), and a mesh equivalent of 14,000. This buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. Our quality compounds have a shelf life of at least 10 years.

Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today!

Every Leatherbeltman Leather Honing Stop Belts are made from Superior Quality leather hides which are consistent in thickness and free from defects.

Get professional looking, mirror polished edges that don't just look great, but are ready to work!

EVERY 2” x 28” Leather Belt we produce is tested to ensure proper fit before leaving our shop!

Proudly Hand-Crafted in Austin, TX USA

Leather Honing, Polishing Strop Belt Instructions:

Belt has been intentionally made smaller than indicated to accommodate for stretching over time.

1. Install belt with smooth side out.

2. With belt running, apply buffing compound. Belt may need frequent applications on initial use.

3. Hold the blade at a low angle to the belt and use light pressure, letting the leather do the work.

4. Compound will build up over time. To remove, hold 400 grit or higher abrasive to leather belt while running.

5. Use caution always, for your own safety, and to prevent accidentally cutting the belt.

For further help, check out our full installation and operational videos.

**100% Satisfaction Guarantee: If for ANY reason, you are not completely satisfied with this product, please contact us and we will issue a full refund or exchange**

Thank you for your purchase and supporting small businesses!!!

ProductSiteLaunchDate : 2023-10-19T16:10:47.920Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 53102501