Cart 2 india

Specification
Brand : CARPRO
BulletPoint1 : Create a perfectly smooth surface without having to resort to wet sanding - a practice that should only be performed by those who have honed their skills in a body shop environment
BulletPoint2 : While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.
BulletPoint3 : Equivalent to 2000 grit sandpaper without the dulling of paint and sanding haze
BulletPoint4 : Please only use these pads if you are sure the orange peel is in the upper (clear coat) and not the color coat layer
BulletPoint5 : Size: 5 1/2" diameter. Thickness: 5/16". Pore size: 80ppi. Foam hardness: 3kpa. Material: Denim polishing surface with hook and loop backing
BulletPoint6 : Do not use without sufficient skill level knowledge of clear coat thickness in conjunction with a paint thickness gauge.
BulletPoint7 : PLEASE NOTE: THESE PADS ARE DECEPTIVE IN THEIR AGGRESIVENESS. Use NO PRESSURE and observe the paint temperature often.
BulletPoint8 : DO NOT USE WITHOUT PAINT GAUGE UNLESS YOU HAVE TAKEN RESPONSIBILITY FOR MOVING FORWARD WITHOUT ONE.
CompatibleMaterial : Paint
ExternallyAssignedProductIdentifier : 8809397817725
IncludedComponents : (1) CARPRO Denim Orange Peel Removal Pad - 5 1/2" (Pack of 1)
ItemName : CARPRO Denim Orange Peel Removal Pad (V2) - Upper Paint Layer Clear Coat Scatch Repair - 5.5" (1 Pack)
ItemPackageDimensions_Height : 21.0058 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 19.1008 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-polisher-and-buffer-pads
Manufacturer : CARPRO
Material : Denim
ModelName : CARPRO Denim Orange Peel Removal Pad - 5 1/2"
ModelNumber : 559
NumberOfItems : 1
PartNumber : 559
ProductDescription : CARPRO Denim Orange Peel Removal Pad - 5 1/2"

With our CARPRO USA Velvet and Denim Orange Peel Removal pads you can now remove or substantially reduce orange peel in the top layer without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.

Features:
Reduce orange peel and deep defects while simultaneously polishing paint.
Equivalent to 2000 grit sandpaper with out the dulling of paint and sanding haze.
Reduce orange peel without sanding.
Orange peel removal without the haze generated by sanding.
Polish the paint while removing the ridges of orange peel.
Less dust and clean up prior to finishing polish.

Directions:
Attach to hook & loop backing plate with rotary polisher for best results.
Apply a few drops of Scholl Concepts S3 Gold XXL to paint or pad according to your skills and preference.
Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
Begin working polish on low speed for a pass.
Step up speed to approximately 1100 rpm (adjust as needed).
With proper lighting observe the level of orange peel removal while you work noting precise surface contact without pressure to level ridges.
After completing each section wipe off paint with soft microfiber towel.
Brush pad in direction of fibers to remove residue.
Apply a couple more drops of polish for next section.
Switch out pads as needed when cut has been compromised and set aside to clean by hand.

Pad Care:
Spray cleaning solution on face of pad.
Brush with Pad Cleaning Brush.
Rinse face of pad.
Allow to dry before next use.
ProductSiteLaunchDate : 2023-10-25T13:35:28.725Z
Size : 5.5 inch (Pack of 1)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31191500