Cart 2 india

Specification
Brand : Kraft Tool
BulletPoint : Finish Broom All bristles are epoxy glued for straightness and strength Lightweight aluminum
Color : Multi
ConstructionType : Coated
ExternallyAssignedProductIdentifier1 : 765139351019
ExternallyAssignedProductIdentifier2 : 0765139351019
FinishType : Brushed
ItemName : Kraft Tools CC203 72" Aluminum Medium/General Purpose Cement Finish Broom
ItemPackageDimensions_Height : 2.13 inches
ItemPackageDimensions_Length : 73 inches
ItemPackageDimensions_Width : 6.25 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : bristle-discs
Manufacturer : Kraft Tool Co.
Material1 : Aluminum
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MaximumRotationalSpeed : 20000 rpm
ModelName : Cement Finish Broom
ModelNumber : CC203
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : KRT-CC203
Pattern : Solid
PowerSourceType : hand_powered
ProductDescription : These unique discs from 3M are a new type of abrasive that is superior to sandpaper, flap wheels, or other types of sanders, brushes, or abrasive wheels. Their flexible bristles can reach into areas with detail and irregular, curved, or flat surfaces. Woodcarvers will appreciate how well they remove the ”fuzzies” without harming any of the underlying detail. In the dental lab, these discs are excellent for cleaning, pre-polishing and polishing of metals and acrylics. They are especially good on hard to polish materials like titanium and valplast. Coarser grits can be used to carve, grind and texture while finer grits will smooth, burnish and polish. The 3M ceramic and aluminum oxide grains embedded throughout the plastic bristles make them very long lasting. Individual discs are stacked to make a brush. Depending on the application, you will want to stack between three and six discs. Be sure to closely follow the directions in the package so that the discs are stacked and mounted properly onto a handpiece or the bench lathe. Full range of grits in 3 sizes for use in flex shaft and micro motor handpieces (9/16”, 3/4” and 1”) and two sizes for use in Foredom's M.BL Lathe (2” and 3”). Use with A-4561 and A-4562 Spindle Adapters and A-M30 and A-M31 mandrels. 20,000 RPM Max Speed. Recommended operating speed when used on the M.BL lathe is 5,000 - 7,000 RPM. Made in USA.
ProductSiteLaunchDate : 2013-05-22T17:40:10.139Z
Size : One Size
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Hard Floor
UnitCount : 1
UnspscCode : 47131600