Cart 2 india

Specification
Brand : CJGHJNFF
BulletPoint : Genuine AllParts Item
BulletPoint1 : - Unique Design: This Custom Shop to add the text and colors you want to customize, creating a distinctive guitar decal that gives your guitar or bass a personal touch ,striking.
BulletPoint2 : - Eay To Use: The high-quality custom bass decals only need to leave a 1-2 mm edge before cutting, then carefully separate the transparent layer of the decal from the paper back and place it on the headstock as needed, gently pressing out the bubbles so that it fits perfectly with the headstock and is easy to operate.
BulletPoint3 : - Easy To Remove: The water slide decal can be easily removed without causing any damage to your headstock and without glue residue.
BulletPoint4 : - Tight Fit: Our special headstock decals are made using non-metallic ink, are clear coated, are thin, have invisible edges and superior adhesion to blend perfectly with the headstock.
BulletPoint5 : - Packing: Set of 2 high-quality water transfer stickers.
Color : CHROME
ConnectorType : 1/4" jack
ExternallyAssignedProductIdentifier1 : 0717325710438
ExternallyAssignedProductIdentifier2 : 0717813922381
ExternallyAssignedProductIdentifier3 : 717813922381
ExternallyAssignedProductIdentifier4 : 717325710438
FinishType : Natural Texture
GpsrSafetyAttestation : 1
IndoorOutdoorUsage : indoor
ItemForm : Sheet
ItemName : Fits For Fender Electric Guitar & Bass Head Stickers - 16 CS P bass Logo Water Transfer Stickers - Trademark Tearable Film
ItemPackageDimensions_Height : 0.9 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : bass-guitar-bridges-and-bridge-parts
Manufacturer : CJGHJNFF
Material : Maple Wood
ModelNumber : 16 CS P bass-2
NumberOfItems : 2
NumberOfPieces : 2
PackageLevel : unit
PartNumber : 16 CS P bass-2
Pattern : Letter Print
ProductDescription : Enhance the look of your electric guitar or bass with our 16 CS P bass Logo Water Transfer Stickers. This set includes 2 high-quality water transfer decals that are specifically designed for use on instruments. Crafted from trademark tearable film, these stickers are easy to apply and provide a durable finish. Perfect for musicians looking to personalize their instruments or replace worn-out logos, these stickers will make your guitar or bass stand out on stage.
Decal Application Instructions:
Having a layer or two of finish on the headstock will be optimal.
NO1. Cut around the entire image leaving a 1-2 millimeter edge.
NO2. Carefully stick the decal and separate the transparent layer from the paper backing and place it on the desired spot on the headstock. just scratch it with a knife or cardboard, and then peel off the second layer of film very easily.
NO3. The decal must be applied on a guitar head that has been coated with primer. If applied directly on bare wood, the adhesion will be poor, and it may tear when removed. Avoid surfaces with wax or similar slippery substances, as the adhesion will also be poor.
NO4. If there is oil or wax on some guitar heads, clean it with water mixed with a small amount of dish soap before applying the decal.
NO5. For maple guitar heads, if the primer is thin, do not let the water dry too much when applying. Gently press down with a paper towel. After application, use a hairdryer to blow dry. Wait at least three days before peeling off the film. When peeling, try to pull from right to left slowly.
NO6. In cold weather, it is best to apply the decal, then use a hairdryer on a warm setting to dry it, and wait as long as possible before peeling.
ProductSiteLaunchDate : 2024-10-06T14:10:51.694Z
SubjectCharacter : P bass Logo
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 60121000
WarrantyDescription : 30 days.