Cart 2 india

Specification
Brand : Generic
BulletPoint : KEEPEEZ 3LB Bread Machine Parts Aceessories Stirrer Rod
BulletPoint1 : Fits Models CBK-200WS.
BulletPoint2 : Only fits Pan Versions that have a visible Red Seal.
BulletPoint3 : Snap Ring Pliers are required to remove & install the snap rings.
BulletPoint4 : You must remove the entire old seal before you can install the new seal.
BulletPoint5 : Read the full product description before you place an order.
Capacity : 3 pounds
CareInstructions : Wipe with Dry Cloth
Color : Brown
ExternallyAssignedProductIdentifier1 : 0769092502631
ExternallyAssignedProductIdentifier2 : 769092502631
IncludedComponents : 1 x Measuring Cup 1 x Measuring Spoon 1 x Blade Removal Hook 1 x Heat-Resistant Glove 1 x Bread Maker 3 x Mixing Blades 1 x User Manual
IsAssemblyRequired : 1
ItemName : Heavy Duty Pan Seal Kit for Cuisinart Bread Maker Model CBK-200WS CBK200WS
ItemPackageDimensions_Height : 14 inches
ItemPackageDimensions_Length : 21 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bread-machine-replacement-parts
Manufacturer : Cuisinart
Material : Alloy Steel
Material1 : Metal
Material2 : Plastic
ModelName : Bread Maker
ModelNumber : CBK 200WS CBK200WS
NumberOfItems : 1
NumberOfPrograms : 2
PartNumber : MBF-060
ProductDescription : Heavy Duty Pan Seal Kit for Cuisinart Bread Maker Model CBK-200WS CBK200WS. The newer red seals in later productions of the pans are custom made two tear seals that have a bottom outer diameter of 19mm and an upper outer diameter of 17mm. These seals must be removed by prying them out with a double ended bottle/can opener or a pick & hook set. The seal can only be pried out if the pan shaft has fallen out the bottom of the pan. If the pan shaft is still secure, then you will not be able to get the seal out without damaging the pan. In this case please do not order a new seal. Please order a new pan. ***If the shaft has already fallen out the bottom, then you will need to pry out the old seal using an old double ended can opener / bottle opener. Place a business card or credit card in the bottom of the pan to prevent scratching when using the can opener to pry out the old seal. Place the pointed end of the opener into the center hole of the seal and gently pry upward moving from side to side until the seal pops out. Please note that the seal has an inner steel frame. If all you have removed so far is a thin piece of rubber, then you will need to remove the rest of the seal known as the inner frame. It is important that you be very careful when removing the old seal. If the hole the seal is in becomes swelled, warped, or chipped then the new seal may not seat successfully. ***I strongly recommend removing the old seal before purchasing a new seal so that you can determine if the pan is in fact repairable. Please remove the seal first and use a magnifying glass to inspect the hole for chipped off non-stick coating, pitting, corrosion, dings, dents, swelling, or warping. If any of the damage above is present, then please do not order a seal. I can guarantee that it will not seat or seal correctly. ***Please be aware that each time you replace the seal it may not last as long as the previous seal, because the sleeve bearing in the bottom of the pan continues to wear.
ProductSiteLaunchDate : 2021-10-11T17:59:29.277Z
Size : 16.1 x 10.6 x 11.8 inches
SlotCount : 3
SpecificUsesForProduct : Hot Dog
Style : Casual
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52141500
Voltage : 120 volts_of_alternating_current
Wattage : 458 watts