Specification Brand : SÜA BulletPoint1 : LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F) BulletPoint2 : A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming BulletPoint3 : ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound*** BulletPoint4 : Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4" BulletPoint5 : Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb ExternallyAssignedProductIdentifier : 00840338557551 ItemDisplayWeight : 2 pounds ItemName : SÜA® - RBCuZn-C - LFB Bare Bronze Brazing Rod - 36" x 1/16" (2 Lb) ItemTypeKeyword : brazing-rods Manufacturer : Mundaka Technologies Inc Material : bronze PartNumber : SWT-LFB10x116_2 ProductDescription : LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F) A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound*** Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4" Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb ProductSiteLaunchDate : 2022-12-15T20:19:54.700Z Size : 1/16" - 2 Lb UnspscCode : 23271800