Cart 2 india

Specification
Brand : SÜA
BulletPoint1 : SÜA SILVER PHOS-COPPER 2% is a low-cost brazing filler metal suitable for joining copper to copper & copper to copper alloys where critical impact or vibration stresses are not encountered in service. It should only be used on assemblies where good fit up can be maintained.
BulletPoint2 : SÜA Silver Phos-Copper 2% is a copper rich, filler metal that is self-fluxing on copper by virtue of its phosphorus content. SÜA SILVER PHOS-COPPER 2% has good flow and wetting properties on copper, brass, and bronze. Its melting characteristics are such that on the low end of its brazing temperature range it has "sluggish" flow characteristics which enable it to fill gaps better, making it ideal for loose-fitting joints.
BulletPoint3 : The self-fluxing property of SÜA SILVER PHOS-COPPER 2% is effective on copper only. Copper base alloys, such as brass or bronze, may be brazed with SÜA SILVER PHOS-COPPER 2% but cannot be used on ferrous metals or nickel base alloys, since the phosphorus produces brittle iron or nickel phosphorus at the joint interface.
BulletPoint4 : The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal. When brazing copper alloys, the properties of joints with good fit-up should exhibit adequate performance.
BulletPoint5 : Available in 5 Sticks, 9 Sticks, 1 Lb (28 Sticks), 2 Lb (56 Sticks), 5 Lb and 10 Lb. Select your option from the menu.
ExternallyAssignedProductIdentifier : 00840338553454
ExternallyAssignedProductIdentifier1 : 0785382707944
ExternallyAssignedProductIdentifier2 : 785382707944
ItemDisplayWeight : 5 ounces
ItemName : SÜA® - BCuP-6 Silver PhosCopper Brazing Rod - 2% Silver - Flat - 1/8" x 0.05" x 20" (9 Sticks)
ItemPackageDimensions_Height : 20 millimeters
ItemPackageDimensions_Length : 70 millimeters
ItemPackageDimensions_Width : 50 millimeters
ItemPackageQuantity : 2
ItemTypeKeyword : brazing-rods
Manufacturer : Mundaka Technologies Inc
Material : Silver-Phos
ModelNumber : RT-1
PartNumber : SWT-S-BCUP6R10X18_9R
ProductDescription : SÜA SILVER PHOS-COPPER 2% is a low-cost brazing filler metal suitable for joining copper to copper & copper to copper alloys where critical impact or vibration stresses are not encountered in service. It should only be used on assemblies where good fit up can be maintained.SÜA Silver Phos-Copper 2% is a copper rich, filler metal that is self-fluxing on copper by virtue of its phosphorus content. SÜA SILVER PHOS-COPPER 2% has good flow and wetting properties on copper, brass, and bronze. Its melting characteristics are such that on the low end of its brazing temperature range it has "sluggish" flow characteristics which enable it to fill gaps better, making it ideal for loose-fitting joints.The self-fluxing property of SÜA SILVER PHOS-COPPER 2% is effective on copper only. Copper base alloys, such as brass or bronze, may be brazed with SÜA SILVER PHOS-COPPER 2% but cannot be used on ferrous metals or nickel base alloys, since the phosphorus produces brittle iron or nickel phosphorus at the joint interface.The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal. When brazing copper alloys, the properties of joints with good fit-up should exhibit adequate performance.Available in 5 Sticks, 9 Sticks, 1 Lb (28 Sticks), 2 Lb (56 Sticks), 5 Lb and 10 Lb. Select your option from the menu.
ProductSiteLaunchDate : 2022-11-09T20:40:08.168Z
Size : 9-Sticks
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 23271800