Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint : Solder Bar
BulletPoint1 : The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.
BulletPoint2 : Size: 3.2 x 1.3 mm x 500 mm/0.13 x 0.05 inch x 19.69 inch (W*H*L); Welding Current: 80(A); Melting Point: 710℃/1310°F; Color: Copper; Style: Round Straight Bar; Material: Phosphor Copper (L201); In the package of: 9PCS x Welding Rods
BulletPoint3 : 1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.
BulletPoint4 : 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
BulletPoint5 : For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Color : Brass
ExternallyAssignedProductIdentifier1 : 037103360120
ExternallyAssignedProductIdentifier2 : 0037103360120
FinishType : Polished
IncludedComponents : Solder wire
ItemForm : Rod
ItemName : MECCANIXITY 9Pcs Copper Brazing Rods, Phosphor Copper Solder, Low Temperature Welding Stick 1/8"x3/64"x20" for Copper Repair, Hvac Refrigerator
ItemPackageDimensions_Height : 1.57 inches
ItemPackageDimensions_Length : 20.47 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 9
ItemShape : Round Rod
ItemTypeKeyword : brazing-rods
Manufacturer : MECCANIXITY
Material : copper
ModelName : Rod
ModelNumber : WALFRONTkb48p3oi1x
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : mea231203ee000221
PowerSourceType : hand_powered
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.

What will I get?
Size: 3.2 x 1.3 mm x 500 mm/0.13 x 0.05 inch x 19.69 inch (W*H*L)
Welding Current: 80(A)
Melting Point: 710℃/1310°F
Color: Copper
Style: Flat Straight Strip
Material: Phosphor Copper (L201)
In the package of: 9PCS x Welding Rods

Are there any advantages of the product?
1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.

How to use it?
1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.

What should I notice?
For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductSiteLaunchDate : 2024-03-19T10:09:37.432Z
SafetyDataSheetUrl : http://www.chipquik.com/msds/BARSN63PB37-8OZ.pdf
Size : 1/16"x20"
SpecificUsesForProduct : Professional
Style : 1.0 mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1