Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods flux coated can braze some pipes or the small copper braze job and the art project. The low-melt solder is widely used for DIY craft drift punches knife handle lathes.
BulletPoint2 : Size: 1.8 x 2.8 x 500 mm/0.07 x 0.11 x 19.69 inch (ID*OD*L); Welding Current: 90-220(A); Melting Point: 870~900℃/1598~1652°F; Color: White coating, (ID*OD*L); Welding Current: 90-220(A); Melting Point: 870~900℃/1598~1652°F; Color: White coating, Copper core; Style: Round Straight Bar; Material: Brass and flux coated; In the package of: 3PCS x Welding Rods
BulletPoint3 : 1.This is a flux-coated brazing rods, so no additional flux is required during welding; 2.The flux is evenly distributed, has good continuity; 3.The welding stick will not get tangled during welding and will not block the conduit; 4.There is less spatter and smog during welding, and the solder joints are firm; 5.Good fluidity during welding, strong-caulking, and can flow into small spaces.
BulletPoint4 : 1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.
BulletPoint5 : Manual measurement, please allow slight errors on size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ItemName : MECCANIXITY 3Pcs Brass Brazing Rods Flux Coated, Phosphor Copper Solder, Low Temperature Welding Sticks 5/64"x7/64"x20" for Copper Repair, Hvac
ItemPackageDimensions_Height : 1.57 inches
ItemPackageDimensions_Length : 20.47 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 3
ItemTypeKeyword : brazing-rods
Manufacturer : MECCANIXITY
Material : copper
PartNumber : mea231203ee000253
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods flux coated can braze some pipes or the small copper braze job and the art project. The low-melt solder is widely used for DIY craft drift punches knife handle lathes.

What will I get?
Size: 1.8 x 2.8 x 500 mm/0.07 x 0.11 x 19.69 inch (ID*OD*L)
Welding Current: 90-220(A)
Melting Point: 870~900℃/1598~1652°F
Color: White coating, Copper core
Style: Round Straight Bar
Material: Brass and flux coated
In the package of: 3PCS x Welding Rods

Are there any advantages of the product?
1.This is a flux-coated brazing rods, so no additional flux is required during welding; 2.The flux is evenly distributed, has good continuity; 3.The welding stick will not get tangled during welding and will not block the conduit; 4.There is less spatter and smog during welding, and the solder joints are firm; 5.Good fluidity during welding, strong-caulking, and can flow into small spaces.

How to use it?
1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.

What should I notice?
Manual measurement, please allow slight errors on size. Before using these brazing rods, please select proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductSiteLaunchDate : 2024-03-19T10:09:21.096Z
Size : 5/64"x7/64"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800