MECCANIXITY 3Pcs Brass Brazing Rods Flux Coated, Phosphor Copper Solder, Low Temperature Welding Sticks 3/32"x9/64"x20" for Copper Repair, Hvac

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 5100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : MECCANIXITY
BulletPoint : Made in US
BulletPoint1 : The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods flux coated can braze some pipes or the small copper braze job and the art project. The low-melt solder is widely used for DIY craft drift punches knife handle lathes.
BulletPoint2 : Size: 2.5 x 3.6 x 500 mm/0.1 x 0.14 x 19.69 inch (ID*OD*L); Welding Current: 90-220(A); Melting Point: 870~900℃/1598~1652°F; Color: White coating, (ID*OD*L); Welding Current: 90-220(A); Melting Point: 870~900℃/1598~1652°F; Color: White coating, Copper core; Style: Round Straight Bar; Material: Brass and flux coated; In the package of: 3PCS x Welding Rods
BulletPoint3 : 1.This is a flux-coated brazing rods, so no additional flux is required during welding; 2.The flux is evenly distributed, has good continuity; 3.The welding stick will not get tangled during welding and will not block the conduit; 4.There is less spatter and smog during welding, and the solder joints are firm; 5.Good fluidity during welding, strong-caulking, and can flow into small spaces.
BulletPoint4 : 1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.
BulletPoint5 : Manual measurement, please allow slight errors on size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Color : White
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier1 : 0818988019187
ExternallyAssignedProductIdentifier2 : 818988019187
ExternallyAssignedProductIdentifier3 : 00652426832095
FcShelfLife : 730 days
Hazmat : 9
Hazmat1 : AEROSOLS, NON-FLAMMABLE
Hazmat10 : EG_LimitedQuantity
Hazmat11 : ES_LimitedQuantity
Hazmat12 : FR_LimitedQuantity
Hazmat13 : GB_LimitedQuantity
Hazmat14 : IN_GroundOnly
Hazmat15 : IT_LimitedQuantity
Hazmat16 : JP_GroundOnly
Hazmat17 : MX_LimitedQuantity
Hazmat18 : NL_LimitedQuantity
Hazmat19 : PL_LimitedQuantity
Hazmat2 : UN1950
Hazmat20 : SA_LimitedQuantity
Hazmat21 : SE_LimitedQuantity
Hazmat22 : SG_LimitedQuantity
Hazmat23 : TR_LimitedQuantity
Hazmat24 : US_ORMD
Hazmat3 : 2.2
Hazmat4 : AE_LimitedQuantity
Hazmat5 : AU_LimitedQuantity
Hazmat6 : BR_LimitedQuantity
Hazmat7 : CA_LimitedQuantity
Hazmat8 : CN_GroundOnly
Hazmat9 : DE_LimitedQuantity
IncludedComponents : 2 lbs
IsExpirationDatedProduct : 1
ItemDisplayWeight : 10.31 pounds
ItemName : MECCANIXITY 3Pcs Brass Brazing Rods Flux Coated, Phosphor Copper Solder, Low Temperature Welding Sticks 3/32"x9/64"x20" for Copper Repair, Hvac
ItemPackageDimensions_Height : 1.57 inches
ItemPackageDimensions_Length : 20.47 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 3
ItemShape : Cylinder
ItemTypeKeyword : brazing-rods
Manufacturer : MECCANIXITY
Material : brass
ModelName : Bare Bronze
ModelNumber : LFB 3/32
NumberOfBoxes : 1
NumberOfItems : 35
PackageLevel : unit
PartNumber : mea231203ee000255
PowerSourceType : ac
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods flux coated can braze some pipes or the small copper braze job and the art project. The low-melt solder is widely used for DIY craft drift punches knife handle lathes.

What will I get?
Size: 2.5 x 3.6 x 500 mm/0.1 x 0.14 x 19.69 inch (ID*OD*L)
Welding Current: 90-220(A)
Melting Point: 870~900℃/1598~1652°F
Color: White coating, Copper core
Style: Round Straight Bar
Material: Brass and flux coated
In the package of: 3PCS x Welding Rods

Are there any advantages of the product?
1.This is a flux-coated brazing rods, so no additional flux is required during welding; 2.The flux is evenly distributed, has good continuity; 3.The welding stick will not get tangled during welding and will not block the conduit; 4.There is less spatter and smog during welding, and the solder joints are firm; 5.Good fluidity during welding, strong-caulking, and can flow into small spaces.

How to use it?
1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.

What should I notice?
Manual measurement, please allow slight errors on size. Before using these brazing rods, please select proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductExpirationType : Expiration On Package
ProductSiteLaunchDate : 2024-03-19T10:07:49.433Z
Size : 3/32"x9/64"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.