Cart 2 india

Specification
AgeRangeDescription : adult
Brand : MECCANIXITY
BulletPoint1 : The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.
BulletPoint2 : Size: 2.5 mm x 250 mm/0.1 inch x 9.84 inch (Dia*L); Welding Current: 80(A); Melting Point: 710℃/1310°F; Color: Copper; Style: Round Straight Bar; Material: Phosphor Copper (L201); In the package of: 21PCS x Welding Rods
BulletPoint3 : 1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.
BulletPoint4 : 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
BulletPoint5 : For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Color : Copper
ExternallyAssignedProductIdentifier : 3341854142889
ItemForm : Rod
ItemName : MECCANIXITY 21Pcs Copper Brazing Rods, Phosphor Copper Solder, Low Temperature Welding Stick 3/32"x10" for Copper Repair, Hvac Refrigerator
ItemPackageDimensions_Height : 31.3 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 5.1 centimeters
ItemPackageQuantity : 21
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : MECCANIXITY
Material : copper
ModelName : QXCIVR
ModelNumber : CEASOLDER, 350ML BOTTLE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : mea231203ee000191
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.

What will I get?
Size: 2.5 mm x 250 mm/0.1 inch x 9.84 inch (Dia*L)
Welding Current: 80(A)
Melting Point: 710℃/1310°F
Color: Copper
Style: Round Straight Bar
Material: Phosphor Copper (L201)
In the package of: 21PCS x Welding Rods

Are there any advantages of the product?
1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.

How to use it?
1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.

What should I notice?
For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductSiteLaunchDate : 2024-03-19T10:09:35.295Z
Size : 3/32"x10"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800