MECCANIXITY 12Pcs Copper Brazing Rods, Phosphor Copper Solder, Low Temperature Welding Stick 1/8"x3/64"x20" for Copper Repair, Hvac Refrigerator

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 5700/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
AgeRangeDescription : adult
Brand : MECCANIXITY
BulletPoint1 : The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.
BulletPoint2 : Size: 3.2 x 1.3 mm x 500 mm/0.13 x 0.05 inch x 19.69 inch (W*H*L); Welding Current: 80(A); Melting Point: 710℃/1310°F; Color: Copper; Style: Round Straight Bar; Material: Phosphor Copper (L201); In the package of: 12PCS x Welding Rods
BulletPoint3 : 1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.
BulletPoint4 : 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
BulletPoint5 : For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Color : Copper
ExternallyAssignedProductIdentifier : 3341854142889
ExternallyAssignedProductIdentifier1 : 652426832439
ExternallyAssignedProductIdentifier2 : 0652426832439
ExternallyAssignedProductIdentifier3 : 00652426832439
IncludedComponents : WELDING WIRE
ItemDisplayWeight : 10.25 pounds
ItemForm : Rod
ItemName : MECCANIXITY 12Pcs Copper Brazing Rods, Phosphor Copper Solder, Low Temperature Welding Stick 1/8"x3/64"x20" for Copper Repair, Hvac Refrigerator
ItemPackageDimensions_Height : 1.57 inches
ItemPackageDimensions_Length : 20.47 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 12
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : MECCANIXITY
Material : copper
ModelName : Rod
ModelNumber : ER310-094-10T
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : mea231203ee000222
PowerSourceType : DCEN
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.

What will I get?
Size: 3.2 x 1.3 mm x 500 mm/0.13 x 0.05 inch x 19.69 inch (W*H*L)
Welding Current: 80(A)
Melting Point: 710℃/1310°F
Color: Copper
Style: Flat Straight Strip
Material: Phosphor Copper (L201)
In the package of: 12PCS x Welding Rods

Are there any advantages of the product?
1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.

How to use it?
1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.

What should I notice?
For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductSiteLaunchDate : 2024-03-19T10:11:30.379Z
Size : 0.094
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.