Cart 2 india

Specification
Brand : MAGNA INDUSTRIES
BulletPoint1 : Joins copper to copper
BulletPoint2 : Convenient to use
BulletPoint3 : Works effectively
BulletPoint4 : 1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.
BulletPoint5 : Manual measurement, please allow slight errors on size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use. Before welding, it is generally necessary to preheat to a temperature of 400-500°C before welding. It must be used with copper gas welding solvent or gas solvent when welding.
Color : Brass
ExteriorFinish : Copper
ExternallyAssignedProductIdentifier1 : 024968316034
ExternallyAssignedProductIdentifier2 : 0024968316034
ItemForm : Rod
ItemName : MAGNA INDUSTRIES MT300PC Rod Copper Phosphorous
ItemPackageDimensions_Height : 29.8 centimeters
ItemPackageDimensions_Length : 0.2 centimeters
ItemPackageDimensions_Width : 4.9 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : MAGNA INDUSTRIES
Material : Copper
MeasurementSystem : Metric
MetalType : Copper
ModelNumber : MT300PC
NumberOfItems : 1
NumberOfPieces : 300
PartNumber : MT300PC
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brass brazing rods is used for welding copper alloy, carbon steel and alloy steel. It can also be used as an inlaid carbide tool or DIY decorate. The low-melt solder is widely used for DIY craft drift punches knife handle lathes.

What will I get?
Size: 1.6 mm x 250 mm/0.06 inch x 9.84 inch (Dia*L)
Welding Current: 90-220(A)
Melting Point: 890~905℃/1634~1661°F
Color: Bronze Tone
Style: Round Straight Bar
Material: Tin Brass(S221)
In the package of: 12PCS x Welding Rods

Are there any advantages of the product?
This brass welding rod is a special brass welding rod containing a small amount of tin and silicon. Tin can improve the flow ability, strength, and corrosion resistance of welding rods, while silicon can effectively control the evaporation of zinc, eliminate gas holes, and achieve satisfactory mechanical properties.

How to use it?
1.Clean the surface of the copper material to be welded; 2.Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3.Contact the welding stick with the copper material to be welded to melt the contact; 4.Remove welding slag and remaining stick after cooling.

What should I notice?
Manual measurement, please allow slight errors on size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use. Before welding, it is generally necessary to preheat to a temperature of 400-500°C before welding. It must be used with copper gas welding solvent or gas solvent when welding.
ProductSiteLaunchDate : 2014-07-16T20:07:56.096Z
Size : 1/16"x10"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
WasherType : Flat