Cart 2 india

Specification
Brand : Blue Demon
BulletPoint1 : The microstructure of this alloy consists of austenitic alloy matrix and chromium/complex carbides
BulletPoint2 : HC470 is specifically formulated to totally eliminate the "worm tracking" type porosity commonly found in this alloy group
BulletPoint3 : Typical applications include crusher jaws, hammers, bucket lips and teeth, wear plates, pins, axles, shafts, cams, eccentrics
BulletPoint4 : Low melting point, good fluidity
BulletPoint5 : Perfect for soldering and brazing. Usually used to welding copper tube of air conditioner,refrigerator and freezer.
Color : Reddish-orange
ExternallyAssignedProductIdentifier1 : 652426001446
ExternallyAssignedProductIdentifier2 : 0652426001446
ExternallyAssignedProductIdentifier3 : 00652426001446
ItemDisplayWeight : 1 pounds
ItemForm : Rod
ItemName : Blue Demon HARDCOVER 470 X 1/8" X 5LB Carton hardfacing electrode for severe abrasion and moderate impact Rc 55-60
ItemPackageDimensions_Height : 36.2 centimeters
ItemPackageDimensions_Length : 5.4 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : Blue Demon
Material : chromium
ModelNumber : HC470-125-05
NumberOfItems : 1
PartNumber : HC470-125-05
ProductDescription :
L201 is a copper-phosphorus binary brazing filler metal close to the eutectic composition. It has a low melting point, good fluidity, and can flow into brazing seams with small gaps. It is generally used in the electromechanical and instrument industries to braze copper and brass parts that are not subject to impact loads.

Phosphor copper welding rod is suitable for welding copper and copper pipe joints of refrigeration systems of air conditioners, freezer and refrigerators.

Phosphorus copper welding rod do not use flux when welding red copper pipes. Phosphorus is a reducing agent that can reduce cuprous oxide and generate phosphorus oxides floating on the surface of the weld. Phosphorus copper welding rod have good fluidity and self-brazing effect. All other silver-copper rod use flux.

If the heating process is slow during brazing, the copper-phosphorus solder has a tendency to segregate, so the heating speed during brazing should be as fast as possible. The color after welding is bright gray, and the color of copper will be restored by immersing in 10% sulfuric acid.

ProductSiteLaunchDate : 2014-01-29T00:00:01-08:00
Size : 1/8"
UnspscCode : 23271800