Cart 2 india

Specification
Action : Fast
AgeRangeDescription : Adult
Brand : Blue Demon
BulletPoint1 : This low carbon alloy is not as strong as 316H at elevated temperatures
BulletPoint2 : This filler metal is primarily used for welding low carbon molybdenum bearing austenitic alloys
BulletPoint3 : AWS A5.9, Welding Current DCEN
BulletPoint4 : Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
BulletPoint5 : Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
Color : Silver
ExternallyAssignedProductIdentifier1 : 652426862030
ExternallyAssignedProductIdentifier2 : 0652426862030
ExternallyAssignedProductIdentifier3 : 00652426862030
FishingTechnique : Casting
IncludedComponents : GOUGING CARBON
ItemDisplayWeight : 1.15 pounds
ItemForm : Rod
ItemName : Blue Demon ER316L X 1/16" X 36" X 1LB Tube stainless steel TIG welding rod
ItemPackageDimensions_Height : 93.98 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 3.048 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : Blue Demon
Material : STAINLESS STEEL TIG WELDING ROD
MeasurementSystem : Metric
ModelName : ER316L-063-01T
ModelNumber : ER316L-063-01T
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ER316L-063-01T
PowerSourceType : DCEN
ProductDescription : Recommended Braze-Welding Procedure: Preheating is recommended for some applications, however, overheating should be avoided. Voids may be formed in the joint by entrapped zinc vapors. Bevel cracks or heavy sections. Clean the area to be brazewelded as thoroughly as possible. Joint clearances of 0.002” – 0.005” (0.05 – 0.13mm) are suitable. Using a slightly oxidizing flame, preheat the part to be brazed. If using LFB, dip the rod into the bronze brazing flux (there is no need for more flux if using LFBFC) and then back to the area being brazed, while keeping the torch in constant motion to avoid overheating. The molten drops of LFB or LFBFC will follow the heat of the torch flame. Repeat the process until the joint is filled (Note: A benefit to using LFBFC over LFB is that it is not necessary to remove flux residue between passes). Allow the part to cool slowly before removing any slag, then use a wire brush to bring out a nice yellow brass color.
ProductSiteLaunchDate : 2013-11-08T00:00:01-08:00
Size : 1/16"
SpecificationMet : AWS A5.9/A5.9M:2006, ER316L
Style : 1# Tube
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Stainless Steel
UnitCount : 1
UnspscCode : 23271800
WarrantyType : Limited warranty