Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Blue Demon
BulletPoint1 : The weld deposit calls for low heat during welding and is fully austenitic
BulletPoint2 : This filler metal may also be used for dissimilar welding
BulletPoint3 : AWS A5.9, Welding Current DCEN
BulletPoint4 : 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
BulletPoint5 : For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Color : Copper
ExternallyAssignedProductIdentifier : 3341854142889
ExternallyAssignedProductIdentifier1 : 652426832439
ExternallyAssignedProductIdentifier2 : 0652426832439
ExternallyAssignedProductIdentifier3 : 00652426832439
IncludedComponents : WELDING WIRE
ItemDisplayWeight : 10.25 pounds
ItemForm : Rod
ItemName : Blue Demon ER310 x 3/32" x 36" x 10LB Box Stainless Steel Tig Welding Rod
ItemPackageDimensions_Height : 6.604 centimeters
ItemPackageDimensions_Length : 92.71 centimeters
ItemPackageDimensions_Width : 7.112 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : Welding Material Sales
Material : metal
ModelName : ER310-094-10T
ModelNumber : ER310-094-10T
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ER310-094-10T
PowerSourceType : DCEN
ProductDescription : What is this?
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.

What will I get?
Size: 2.5 mm x 250 mm/0.1 inch x 9.84 inch (Dia*L)
Welding Current: 80(A)
Melting Point: 710℃/1310°F
Color: Copper
Style: Round Straight Bar
Material: Phosphor Copper (L201)
In the package of: 21PCS x Welding Rods

Are there any advantages of the product?
1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.

How to use it?
1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.

What should I notice?
For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
ProductSiteLaunchDate : 2015-06-24T08:00:01.000Z
Size : 0.094
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 23271800