Cart 2 india

Specification
Brand : Blue Demon
BulletPoint1 : BD 3000 can be used to weld dissimilar or unknown metals and produces smooth, porosity free welds without undercut or splatter
BulletPoint2 : BD 3000 contains a special ferrite balanced chemistry. This allows the rod to be used as a "Stud Pulling" electrode – able to be used to remove broken studs, bolts, drill bits, etc
BulletPoint3 : Typical applications for this welding electrode include: welding dissimilar metals, repair of tools, dies, springs, welding carbon steel, rebuilding shafts and blades used in the chemical, construction and mining industries, and more!
BulletPoint4 : This rod can be used in all positions on AC or DC with a reverse polarity connection (DCEP)
BulletPoint5 : Yield Strength: ksi 94 Tensile Strength: ksi 132, Tensile Strength as work hardened: ksi 186
ExternallyAssignedProductIdentifier : 00840338553782
ExternallyAssignedProductIdentifier1 : 652426622528
ExternallyAssignedProductIdentifier2 : 0652426622528
ExternallyAssignedProductIdentifier3 : 00652426622528
IncludedComponents : WELDING WIRE
ItemDisplayWeight : 0.64 pounds
ItemName : Blue Demon Alloy 3000 X 3/32" X 14" X POP Pack dissimilar metals maintenance electrode - 4 rods
ItemPackageDimensions_Height : 2.286 centimeters
ItemPackageDimensions_Length : 41.402 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : brazing-rods
Manufacturer : Blue Demon
Material : metal
ModelName : BD-3000-332-POP
ModelNumber : BD-3000-332-POP
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : BD-3000-332-POP
PowerSourceType : AC-DC
ProductDescription : Recommended Braze-Welding Procedure: Preheating is recommended for some applications, however, overheating should be avoided. Voids may be formed in the joint by entrapped zinc vapors. Bevel cracks or heavy sections. Clean the area to be brazewelded as thoroughly as possible. Joint clearances of 0.002” – 0.005” (0.05 – 0.13mm) are suitable. Using a slightly oxidizing flame, preheat the part to be brazed. If using LFB, dip the rod into the bronze brazing flux (there is no need for more flux if using LFBFC) and then back to the area being brazed, while keeping the torch in constant motion to avoid overheating. The molten drops of LFB or LFBFC will follow the heat of the torch flame. Repeat the process until the joint is filled (Note: A benefit to using LFBFC over LFB is that it is not necessary to remove flux residue between passes). Allow the part to cool slowly before removing any slag, then use a wire brush to bring out a nice yellow brass color.
ProductSiteLaunchDate : 2014-01-30T00:00:01-08:00
Size : 3/32"
Style : 4 Rods
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121400