Cart 2 india

Specification
Action : Fast
AgeRangeDescription : Adult
Brand : Blue Demon
BulletPoint1 : Copper coating improves conductivity offering more efficient and cooler operation
BulletPoint2 : An electric arc is created which melts away the metal, uses compressed air to blow the molten metal out of the groove
BulletPoint3 : Typical chemistry, 80% graphite and 20% copper
BulletPoint4 : Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
BulletPoint5 : Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
Color : Length 13"
ExternallyAssignedProductIdentifier1 : 652426023219
ExternallyAssignedProductIdentifier2 : 0652426023219
ExternallyAssignedProductIdentifier3 : 00652426023219
FishingTechnique : Casting
IncludedComponents : GOUGING CARBON
ItemDisplayWeight : 1 pounds
ItemForm : Rod
ItemName : Blue Demon ACGE-CC X 5/32" X 12" Copper Coated Gouging Carbon, 100-Piece
ItemPackageDimensions_Height : 32.1 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 6.8 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : brazing-rods
Manufacturer : Blue Demon
Material : graphite
MeasurementSystem : Metric
ModelName : ACGE-CC-532
ModelNumber : ACGE-CC-532
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ACGE-CC-532
PowerSourceType : AC/DC
ProductDescription : Recommended Braze-Welding Procedure: Preheating is recommended for some applications, however, overheating should be avoided. Voids may be formed in the joint by entrapped zinc vapors. Bevel cracks or heavy sections. Clean the area to be brazewelded as thoroughly as possible. Joint clearances of 0.002” – 0.005” (0.05 – 0.13mm) are suitable. Using a slightly oxidizing flame, preheat the part to be brazed. If using LFB, dip the rod into the bronze brazing flux (there is no need for more flux if using LFBFC) and then back to the area being brazed, while keeping the torch in constant motion to avoid overheating. The molten drops of LFB or LFBFC will follow the heat of the torch flame. Repeat the process until the joint is filled (Note: A benefit to using LFBFC over LFB is that it is not necessary to remove flux residue between passes). Allow the part to cool slowly before removing any slag, then use a wire brush to bring out a nice yellow brass color.
ProductSiteLaunchDate : 2013-09-30T00:00:01-07:00
Size : 5/32"
Style : 100-Piece Pack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800