Cart 2 india

Specification
Action : Fast
AgeRangeDescription : Adult
Brand : Blue Demon
BulletPoint : Solder Paste with Low-Temperature Melting Point
BulletPoint1 : It produces x-ray quality welds in flat, horizontal, overhead, vertical-up and vertical-down positions
BulletPoint2 : E6010 was developed for the pipe welding industry and is recommended for welding API grades A25, A, B and X42 pipe and general structural fabrication
BulletPoint3 : Typical applications include general purpose fabrication, maintenance welding, construction and shipbuilding, pipe welding
BulletPoint4 : Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
BulletPoint5 : Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 652426482719
ExternallyAssignedProductIdentifier2 : 0652426482719
ExternallyAssignedProductIdentifier3 : 00652426482719
IncludedComponents : welding rod
ItemDisplayWeight : 2 pounds
ItemName : Blue Demon 6010 X 5/32" X 14" X 1LB Tube Carbon Steel Pipe Welding Electrode
ItemPackageDimensions_Height : 39 centimeters
ItemPackageDimensions_Length : 3.1 centimeters
ItemPackageDimensions_Width : 3.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : brazing-rods
Manufacturer : Blue Demon
Material : carbon
ModelName : E6010-532-01
ModelNumber : E6010-532-01
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : E6010-532-01
PowerSourceType : DCEP
ProductDescription : Recommended Braze-Welding Procedure: Preheating is recommended for some applications, however, overheating should be avoided. Voids may be formed in the joint by entrapped zinc vapors. Bevel cracks or heavy sections. Clean the area to be brazewelded as thoroughly as possible. Joint clearances of 0.002” – 0.005” (0.05 – 0.13mm) are suitable. Using a slightly oxidizing flame, preheat the part to be brazed. If using LFB, dip the rod into the bronze brazing flux (there is no need for more flux if using LFBFC) and then back to the area being brazed, while keeping the torch in constant motion to avoid overheating. The molten drops of LFB or LFBFC will follow the heat of the torch flame. Repeat the process until the joint is filled (Note: A benefit to using LFBFC over LFB is that it is not necessary to remove flux residue between passes). Allow the part to cool slowly before removing any slag, then use a wire brush to bring out a nice yellow brass color.
ProductSiteLaunchDate : 2013-10-18T00:00:01-07:00
SafetyDataSheetUrl : https://cdn.shopify.com/s/files/1/0681/6048/7741/files/SDS-SW-CORE-240803.pdf?v=1723255602
Size : 5/32" (Diameter)
Style : 1# Tube
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 23271800