Cart 2 india

Specification
Brand : Auart
BulletPoint1 : HS221 is a special brass welding wire with a small amount of tin and silicon
BulletPoint2 : Brass oxyacetylene gas welding and carbon arc welding, used as a filler material
BulletPoint3 : Also widely used in brazing copper, steel, copper-nickel alloy, gray cast iron and inlaid carbide tools, etc., with a wide range of uses.
BulletPoint4 : This product is ideal for all agricultural repairs and maintenance
BulletPoint5 : Our products have good weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing performance.
Color : Copper Welding Rod
ExternallyAssignedProductIdentifier : 7618269186521
ExternallyAssignedProductIdentifier1 : 0886183394606
ExternallyAssignedProductIdentifier2 : 886183394606
ItemName : Auart Zyilei-Performace 1Kg HS211 Brass Welding Rods, for Brazing Soldering Repair Tools, Wires Sticks 1.6mm-3.0mm Diameter 500mm Length, Wide Application (Diameter : 3.0mm)
ItemPackageQuantity : 1
ItemTypeKeyword : brazing-rods
Manufacturer : Auart
Material : Brass
NumberOfItems : 1
PartNumber : Auart
ProductDescription : -HS221 is a special brass welding wire with a small amount of tin and silicon. The melting point is about 890 degrees Celsius. Tin can improve the fluidity, strength and corrosion resistance of the welding wire, while silicon can effectively control the evaporation of zinc, eliminate pores and obtain satisfactory mechanical properties.

Widely use

-Brass oxyacetylene gas welding and carbon arc welding, used as a filler material, also widely used in brazing copper, steel, copper-nickel alloy, gray cast iron and inlaid carbide tools, etc., with a wide range of uses.

Precautions:

1. The groove of the weldment and the surface of the welding wire must be carefully cleaned before welding.

2. Generally preheat to 400-500 degrees Celsius before welding. Copper gas welding solvent must be used as the solvent when welding.

3. The welding flame should be a neutral flame or a slight oxidizing flame. The temperature during welding should be appropriately reduced, the welding speed should be increased, and the residence time of the molten pool at high temperatures should be minimized to reduce the evaporation and oxidation of zinc.
ProductSiteLaunchDate : 2021-05-20T02:34:36.207Z
Size : 3.0mm
Style : Manual