Cart 2 india

Specification
Brand : Alberts
BulletPoint1 : Material: galvanised steel, thick layer passivated
BulletPoint2 : Dimensions: backset diameter 20 mm – length pin 60 mm – distance pin plate 35 mm – plate width 60 mm – plate height 189 mm – material thickness 6 mm – number of holes 6 – hole diameter 7.5 mm
BulletPoint3 : Design: DII hook - for screwing on - recessed screw holes
BulletPoint4 : Hinges are suitable together with shutter straps for rotatably attaching doors, garden gates, shutters etc.
BulletPoint5 : Alberts not only offers an extensive range of high-quality fittings. We also stock a variety of hardware, profiles, sheet metal and angles, attractive and safe window grids, as well as practical and decorative fences.
CareInstructions : Spot Clean
Color : Yellow-Galvanised
ControlType : cordless operation
CustomerPackageType : Standard Packaging
DriveSystem : Slotted, Phillips
ExteriorFinish : Zink
ExternallyAssignedProductIdentifier1 : 4004338311513
ExternallyAssignedProductIdentifier2 : 04004338311513
ExternallyAssignedProductIdentifier3 : 00707392736677
FinishType : White
GpsrSafetyAttestation : 1
IncludedComponents : 20 PCS E-Track Wood Beam End Socket
ItemName : Alberts 311513 Clamp on Plate | in The Designs with DI or DII Hooks | Galvanised | Thick Layer Passivated | Backset Diameter 20 mm | Plate 189 x 60 mm
ItemPackageDimensions_Height : 18.6 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 6.4 centimeters
ItemPackageQuantity : 1
ItemShape : Square" or "Rectangular
ItemTypeKeyword : hardware-brackets
Manufacturer : Gust. Alberts GmbH & Co.KG
Material : Steel
Material1 : Plastic
Material2 : Wood
MaximumShearStrength : 300-400 MPa
MeasurementSystem : Metric
MetalType : Legierter Stahl
ModelName : Simpson Strong-Tie
ModelNumber : 311513
MountingType : Door Mount
NumberOfItems : 1
NumberOfPieces : 1
Opacity : Blackout adult_us
OperationMode : Manual
PackageLevel : unit
PartNumber : 311513
PatternType : Solid
ProductDescription :
4 Pieces 2 inch metal hold down brackets and 4 pieces pins, blind brackets blind holder replacements for horizontal blinds shades windows doors

Proper ans simple appearance:
These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well.




Installation procedures:
1 What you need: drill, screwdriver, tape measure, hammer, pencil.
2 If the bottom rail is not fitted with pins, drill a approx. 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail.
3 Punch the pins in.
4 Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil.
5 Screw the bracket to the door.
6 Measure the position of the bracket now screwed to the door and mark on the other side.
7 Then repeat the above steps to install the second bracket.

Specification:
Material: metal

Package includes:
4 x Hold down brackets
4 x Pin bolts

Warm notice:
Slight size errors may exist due to manual measurement.
To avoid choking hazard, please keep the products away from kids under the age of 3.
ProductSiteLaunchDate : 2012-09-14T06:32:10.761Z
RecommendedUsesForProduct : 戶外
RoomType : Living Room
Size : Dornmaß-Ø: 20 mm
SpecificUsesForProduct : 家居装饰
StreetDate : 2017-06-27T00:00:01Z
Style : Industrial Style
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500
WaterResistanceLevel : not_water_resistant