Cart 2 india

Specification
Brand : YANGCAN
BulletPoint1 : Direct replacement for Hendrickson S21307 or S-21307, Cross References for Hendrickson S-21307, for Meritor R309575, for Sirco SH2034, for Tiger Tool 15040, for BWP HE9AA-T, for Dayton 334-936, for Euclid E-9575
BulletPoint2 : Applications for Automann TS TRB5912, for Dayton TS 334-1576, for Euclid TS E-10729A, for Flagg TS HT245, for Gaff TS 13628 for Hendrickson TS S-24691
BulletPoint3 : This bushing installation tool is specially designed for Hendrickson Turner Intraax wide bushings. With its durable construction and high-quality materials, it is guaranteed to make the installation process a breeze.
BulletPoint4 : Please make sure Use LUBE on Threads of Tool, Thrust Bearing, and Washer Faces, Please also ensure the Bushing is Well Lubed with Bushing Supplied Lube
BulletPoint5 : Package including 1 Set of Bushing Installation Tool and lube
BulletPoint6 : 2 Pack 135 degree bracket, no lags screws
Color : As Picture
CompatibleMaterial : Vinyl
ExternallyAssignedProductIdentifier : 4670264544846
ExternallyAssignedProductIdentifier1 : 0796159356111
ExternallyAssignedProductIdentifier2 : 796159356111
ExternallyAssignedProductIdentifier3 : 785577984273
ExternallyAssignedProductIdentifier4 : 782247855130
FinishType : Strong Hurricane Ties
IncludedComponents : 1*installation tool
ItemForm : Liquid
ItemName : YANGCAN Bushing Installation Tool Fit for Hendrickson Turner Intraax Wide Beam Bushing Complete Kit - S21307
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 13 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemShape : Shoulder Shape
ItemTypeKeyword : hardware-braces
ItemVolume : 6 fluid_ounces
Manufacturer : YANGCANAUTO
Material : Metal
MaximumWeightRecommendation : 1000 pounds
ModelName : Bushing Installation Tool
ModelNumber : YC-BS-06
NumberOfItems : 1
NumberOfPieces : 8
PartNumber : YC-BSH-06
ProductDescription :
This bushing installation tool is specially designed for Hendrickson Turner Intraax wide bushings. With its durable construction and high-quality materials, it is guaranteed to make the installation process a breeze. The manufacturer part number is S21307. This tool falls under the categories of Air Ride Suspension, Suspension & Steering, Commercial Truck Parts, and Parts & Accessories. Upgrade your equipment with this efficient bushing installation tool.

Bushing Installation Tool for Hendrickson Replace Part # S21307, E9575, TRB5912-T Automann

Must Use LUBE on Threads of Tool, Thrust Bearing, and Washer Faces
Must Also Ensure the Bushing is Well Lubed with Bushing Supplied Lube
S-21307 Wide Beam Bushing Installation Tool
For use with Hendrickson Tri-Functional Wide Beam Bushing Kits
Ensure that threads on tool are well lubricated before and during use to avoid damaging threads

This kit will easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings

Cross References:
for Hendrickson S-21307
for Meritor R309575
for Sirco SH2034
for Tiger Tool 15040
for BWP HE9AA-T
for Dayton 334-936
for Euclid E-9575

Applications:
for Automann TS TRB5912
for Dayton TS 334-1576
for Euclid TS E-10729A
for Flagg TS HT245
for Gaff TS 13628
for Hendrickson TS S-24691

Removal of Bushing：
1.Scribe the bushing orientation on the beam tube and compression tube.
2.The spring pins are not required to line up with the bushing holes during removal.
3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Hook up hydraulics and begin removal operation.
4.After each 2 inch stroke, re-tighten nuts to take up slack. (Most bushing will require 3-4 adjustments)

Installation of Bushing:

1.Lubricate the bushing and insert the bushing into compression cylinder.

2.Place the plunger on top of the bushing, align the mark on the bushing with the mark on the plunger. The 4 corresponding pins to the bushing type you are installing should seat into the bushing.

3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Confirm the plunger is aligned with the scribed mark on the beam tube and the pins are still engaged in the bushing. Hook up hydraulics and begin installation operation.

4.After each 2 inch stroke, retighten nuts to take up slack. (Most bushing will require 3-4 adjustments) k. (Most bushing will require 3-4 adjustments)
ProductSiteLaunchDate : 2024-09-07T01:51:33.384Z
RecommendedUsesForProduct : Roofing Trusses Wood Timber
Size : Strong Black 8 Pcs
Style : Strong Black Hurricane Tie 8 Pcs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 8
UnspscCode : 31162500
WaterResistanceLevel : waterproof