Cart 2 india

Specification
Brand : North Star Knife & Ulu
BulletPoint1 : Clean Look: This Blank has a Clean Look that Makes it Fitting for Most Base Styles and Materials
BulletPoint2 : Easy Installation: Threaded End Great for DIY and Craft Projects
BulletPoint3 : 4 Square Openers -Size: 1.5 inch wide and 3.25 inch long
BulletPoint4 : Material: Plated Alloy
BulletPoint5 : Package Includes: 1 x Bottle Opener Key Chain.
Color : Gray
ExternallyAssignedProductIdentifier1 : 783120335664
ExternallyAssignedProductIdentifier2 : 0783120335664
FinishType : Alloy
IsCustomizable : 1
ItemName : Bottle Opener for DIY Craft and Handmade by North Star Knife and Ulu (Square Opener (4ct))
ItemPackageDimensions_Height : 9.1948 centimeters
ItemPackageDimensions_Length : 2.4892 centimeters
ItemPackageDimensions_Width : 5.588 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bottle-openers
Manufacturer : North Star Knife & Ulu
Material : Zinc
Material1 : Metal
Material2 : plated alloy
ModelNumber : CH-PPL
NumberOfItems : 4
PartNumber : Blank
Pattern : Solid
ProductDescription : I am a craftsman that lives in Fairbanks Alaska, I make openers and bottle stoppers from antler and wood. I would love to see photos of your creations in the feedback! Also, I am happy to help you work through any installation questions and make recommendations. Here are my top installation TIPS: 1.NOT TOO TIGHT! If your bore hole is too tight the epoxy can’t do a good job. My rule of thumb is that if you can’t turn the opener into the hole by hand then it is TOO TIGHT! 2.EPOXY Matters: Don’t cut corners with the epoxy and use a fast cure solution. I recommend System Three T-88 which cures slowly and holds well 3.USE TAPE: If you tape off the head of your opener before installation you can keep it clean from epoxy residue and free of scratches. Good Luck, Nate
ProductSiteLaunchDate : 2020-07-07T20:23:48.235Z
Size : Whole length: 8.5cm(3.34");
Style : Square Opener (4ct)
UnitCount : 1
UnspscCode : 52151600