Cart 2 india

Specification
Brand : HumblePleb
BulletPoint1 : Realistic Design: The 1/10 Scale Hydraulic Jack Model is a full-metal construction with a stainless steel cylinder and aluminum alloy base shell for an authentic look.
BulletPoint2 : Dual-Stage Piston: Equipped with a two-stage piston rod, providing a precise and effective lifting mechanism.
BulletPoint3 : Impressive Capacity: Capable of lifting up to 15kg, offering a conservative yet practical demonstration of real hydraulic jacks.
BulletPoint4 : Highly Detailed Structure: Features a precise structure that mimics the functionality of a real hydraulic jack.
BulletPoint5 : Perfect for Display: Ideal for collectors or as a teaching aid for mechanical principles.
Color : Black
IncludedComponents : Hydraulic Jack Model * 1
ItemName : Full Metal 1/10 Scale Hydraulic Jack Model, Hand-Crank Vertical Jack Model
ItemPackageDimensions_Height : 2.4 inches
ItemPackageDimensions_Length : 3.9 inches
ItemPackageDimensions_Width : 3.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bottle-jacks
Manufacturer : HumblePleb
Material : Metal
ModelName : Model-279
NumberOfItems : 1
PartNumber : PHY-279
ProductDescription :
This full-metal jack model features a stainless steel cylinder, aluminum alloy base shell, realistic appearance, precise structure, and dual-stage piston rod with a conservative lifting capacity of 15kg.

Instructions for use:
When you receive the product, the jack will be in the fully lifted position. At this point, pull out the hand crank and use the head of the crank to rotate the pressure relief valve counterclockwise one and a half turns. Slowly press the piston rod to the lowest position, then rotate the pressure relief valve clockwise one and a half turns. Insert the hand crank into the handle and move it up and down. The jack will then begin to function. (For the first use, press the piston rod and crank the hand crank slowly. If the speed is too fast, air bubbles may form in the hydraulic oil inside the cylinder, causing a slight amount of hydraulic oil to be expelled through the vent hole due to the rising oil level. This is normal and will disappear after several work cycles.)

Important Notes:

• The vertical jack can only be used in an upright position; it should not be used horizontally or upside down.
• If the jack does not reach the top when cranking, use a syringe to add hydraulic oil through the oil filling port.
• When storing, ensure the jack is in its fully lifted position. If the piston rod is retracted, do not place the jack horizontally or upside down, as hydraulic oil may leak from the oil fill/vent hole.

ProductSiteLaunchDate : 2024-09-09T14:43:01.855Z
Size : 13mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1