Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Erhdexzhg
BulletPoint1 : 【Materials】: This 30 ton hydraulic ram jack is made of steel and rubber, which is strong, durable, and not easy to deform. Good materials can extend its service life.
BulletPoint2 : 【Large Tonnage】: This 30 ton hydraulic ram jack has a tonnage of 30T/66138lbs, which is suitable for shipyards, bridges, large machines. Easy to Carry: The 30 ton hydraulic ram jack is a split type, you can detach the jack and pump to convenience you to carry.
BulletPoint3 : 【Easy to Operate】: You just need to press the handle up and down to jack up heavier items, so it is very labor-saving and convenient to use.
BulletPoint4 : 【Quick Coupling】: The quick coupling adopts threaded ZG3/8, which is equipped with a steel ball to prevent oil leakage, making it safer to use.
BulletPoint5 : 【Easy to Install】: This 30 ton hydraulic ram jack is simple in structure and fully packaged. You need to connect the jack and pump to use, which is very simple and can save a lot of time and effort.
Color : black+red
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : Bus
CompatibleWithVehicleType3 : Motorcycle
CompatibleWithVehicleType4 : Trailer
ExternallyAssignedProductIdentifier : 6967734075459
ExternallyAssignedProductIdentifier1 : 0769092502396
ExternallyAssignedProductIdentifier2 : 769092502396
IncludedComponents : 1* Hydraulic Jack 1* Pump
IsAssemblyRequired : 1
ItemName : Erhdexzhg 30 ton Hydraulic Ram Jack + Hand Pump Stoke Mini Protable Hydraulic Cylinder Industrial Super Thin Lifting Jack, not for Car (30T Hydraulic Jack + CP-700 Pump) for Machinery Shipbuilding
ItemPackageDimensions_Height : 8.66 inches
ItemPackageDimensions_Length : 11.42 inches
ItemPackageDimensions_Width : 11.02 inches
ItemTypeKeyword : bottle-jacks
LoadCapacity : 66138 lbs
Manufacturer : Erhdexzhg
Material1 : Carbon Steel
Material2 : Cast Iron
ModelName : 30 ton Hydraulic Ram Jack + Hand Pump Stoke
ModelNumber : BI-ZH1876-195-ERHD
NumberOfItems : 1
PartNumber : BI-ZH1876-195-ERHD
ProductDescription :

Application

It is often used in power, chemical, steel, bridges, and other industries.  It is suitable for railway vehicle maintenance, mechanical installation, construction engineering support, etc.

Specification

Color: Black, Yellow, Silver

Material: Steel

Quick Coupling Type (Thread): ZG3/8

Fuel Hose Material: Rubber

Gross Weight: 16.5kg/36.3lbs

Package Size: 64*19*18.5cm/25.1*7.4*7.2inch

Jack Model: RSC-3050

Tonnage: 30T/66138lbs

Travel(Adjustable Height): 50mm/1.9inch

Jack Height: 105mm/4.1inch

Jack Extended Height: 155mm/6.1inch

Jack Diameter: 104mm/4.09inch

Oil Storage Capacity: 210CC

Jack Weight: 5.5kg/12.1lbs

Pump Model: CP-700

Oil Storage Capacity: 700CC

Pump Max.  Pressure: 70MPa

Pump Min. Pressure: 7MPa

Pump Weight: 10.5kg/23.1lbs

How to Use

1. First, connect the quick connector of the manual pump to the jack.

2. Select the position and tighten the hydraulic pump drain screw clockwise.

3. Press the handle up and down.

4. When you can see the coil on the spindle, stop pressing.

5. Loosen the hydraulic pump oil drain screw counterclockwise.

Package Included

1* Hydraulic Jack

1* Pump

Notes

1. Please keep the load bearing surface hard and flat and do not exceed the tonnage and rated strok, otherwise, the cylinder will be damaged.

2. It is only applicable to railroad vehicle maintenance, machinery installation, construction project support, etc., not applicable to household cars.

3. The package does not include hydraulic oil, please buy it locally by yourself.  Thank you for your understanding.

4. Please stop immediately when you see the stop line.

5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

Size : 32 T
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101600
WarrantyDescription : no