Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : Powerful Lifting Force: The bottle jack is made of quality alloy steel with baking paint treatment on the surface, which is reinforced, not easy to rust and deform, with a strong lifting force of 50T/110,231 lbs
BulletPoint2 : High/Low-Temperature Resistance: The hydraulic system uses quality lubricants for high/low-temperature flexibility allowing the to operate at temperatures between -4°F and 113°F
BulletPoint3 : Sufficient Lifting Height: In addition to the height of the jack body (10.23 in), the piston rod (5.9 in) and screw rod (2.36 in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5 in) to a wider range of uses
BulletPoint4 : Good Sealing:The hydraulic jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage
BulletPoint5 : Use More Safely: The low profile bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to avoid damage to the jack. The height-limiting device avoids over-pumping
CompatibleWithVehicleType : cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment
IncludedComponents1 : 1* Hydraulic Cylinder Jack
IncludedComponents2 : 3* Levers
IncludedComponents3 : 1* English Manual
IsAssemblyRequired : 1
ItemName : AGULIUM 50T(110,231 lbs) Hydraulic Stubby Low Profile Welded Bottle Jack, Red
ItemTypeKeyword : bottle-jacks
LoadCapacity : 50 ton
Manufacturer : AGULIUM
Material : Alloy Steel
ModelName : bottle jack
ModelNumber : GYKNCFR3WD
NumberOfItems : 1
PartNumber : GYKNCFR3WD
ProductDescription :

Details

Oil Return Valve: The oil return valve at the bottom makes it easy to raise the piston rod and retract the rod to the cylinder after use, tightening clockwise to raise and loosening counterclockwise to lower.

Application

It can be used in agriculture and industrial environments to lifting cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment.

 

Specifications

• Material: Alloy Steel 
• Color: Red
• Process: Baking Paint
• Operation Temperature: -20~45°C/-4~113°F
• Body Height: 26cm/10.23in
• Lifting Height: 15cm /5.9in
• Adjustment Height: 6cm /2.36in
• Maximum Lifting Height: 47cm /18.5in
• Housing Diameter: 14cm/5.51in
• Base Size: 18.4*16cm/7.24*6.29in
• Product Height: 26cm/10.23in
• Net Weight: 17kg/37.47lbs
• Loading Capacity: 50T/110,231 lbs

Package Included

• 1* Hydraulic Cylinder Jack
• 3* Levers
• 1* English Manual

Notes

• This is a hydraulic jack and cannot be used for jacking or fixing for a long time.
• It is prohibited to screw out the oil valve, otherwise the use of the product will be affected.
• Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load. If the jack cannot be lifted, please check whether the oil valve is tightened.
• Park the vehicle on a level and hard ground before using the jack, and open the danger warning sign behind you. When the jack supports the vehicle, it is strictly forbidden to enter the vehicle bottom!  
• Observe the car chassis and put the jack inside the side frame.
• To ensure the normal use of the jack, please keep the jack piston rod clean and lubricated.
• When the jack is not in use, the oil drain valve should be closed first and the jack should be placed vertically, otherwise oil leakage will occur!  
• The paint may drop and some jacks may leak oil during express delivery, which will not affect the use. Please make sure you don't mind before ordering.

SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101600
WarrantyDescription : One year free warranty against manufacturer's defects only