SpecificationBrand : MUSESPANI
BulletPoint1 : Sturdy and Durable: It is made of high-quality alloy steel with baking paint treatment on the surface, which is very reinforced, anti-oxidation, anti-rust, and impact-resistant, for a strong inclusive working environment as well as ensuring a long service life.
BulletPoint2 : Powerful Lifting Force: The smooth surface of the piston rod is beautiful, anti-corrosion, and also has strong pressure resistance, with a strong lifting force of 50T/110,231 lbs.
BulletPoint3 : Sufficient Lifting Height: In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses.
BulletPoint4 : High / Low-Temperature Resistance: The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F.
BulletPoint5 : Compact and Portable: Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, it has a handle that makes it easy to move and carry to any location.
BulletPoint6 : Length_Show:24.50 in
BulletPoint7 : Weight_Show:90.00lbs
BulletPoint8 : Width_Show:12.20 in
Color : Red
CompatibleWithVehicleType : ATV
ExternallyAssignedProductIdentifier1 : 0756804651800
ExternallyAssignedProductIdentifier2 : 756804651800
IncludedComponents : 1* Hydraulic Cylinder Jack 3* Levers 1* English Manual
IncludedComponents1 : 1* Hydraulic Jack
IncludedComponents2 : 1* Pump
IncludedComponents3 : 1* English Manual
ItemName : 50 Ton /110,231 lbs Heavy Duty Welded Hydraulic Car Bottle Jack,Tire Repairing Lift Alloy Steel Shop w/Manual Handle for Repair Vehicle, Pickup, Truck, w/Manual Handle, (Red
ItemPackageDimensions_Height : 11.02 inches
ItemPackageDimensions_Length : 7.87 inches
ItemPackageDimensions_Width : 6.69 inches
ItemTypeKeyword : bottle-jacks
LoadCapacity : 50 Tons
Manufacturer : MUSESPANI
Material : Alloy Steel
ModelName : 50 Ton /110,231 lbs Heavy Duty Welded Hydraulic Car Bottle Jack
ModelNumber : GYKNCFR3WDYB8
NumberOfItems : 1
PartNumber : GYKNCFR3WDYB8-AW
ProductDescription :
Specifications
Material: Alloy Steel,Color: Red
Process: Baking Paint
Operation Temperature: -20~45°C/-4~113°F
Body Height: 26cm/10.23in
Lifting Height: 15cm /5.9in
Adjustment Height: 6cm /2.36in
Maximum Lifting Height: 47cm /18.5in
Housing Diameter: 14cm/5.51in
Base Size: 18.4*16cm/7.24*6.29in
Product Height: 26cm/10.23in
Gross Weight: 20kg/44.44lbs
Net Weight: 17kg/37.47lbs
Loading Capacity: 50T/110,231 lbs
Notes
1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2. This is a hydraulic jack and cannot be used for jacking or fixing for a long time.
3. It is prohibited to screw out the oil valve, otherwise the use of the product will be affected.
4. Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load. If the jack cannot be lifted, please check whether the oil valve is tightened.
5. Park the vehicle on a level and hard ground before using the jack, and open the danger warning sign behind you. When the jack supports the vehicle, it is strictly forbidden to enter the vehicle bottom!
6. Observe the car chassis and put the jack inside the side frame.
7. To ensure the normal use of the jack, please keep the jack piston rod clean and lubricated.
8. When the jack is not in use, the oil drain valve should be closed first and the jack should be placed vertically, otherwise oil leakage will occur!
9. The paint may drop and some jacks may leak oil during express delivery, which will not affect the use. Please make sure you don't mind before ordering.
ProductSiteLaunchDate : 2024-08-29T17:19:49.642Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101600
WarrantyDescription : yes