Cart 2 india

Specification
Brand : Micro 100
BulletPoint1 : Designed for facing and boring applications in bores .0550" and larger
BulletPoint2 : Polished split face for improved edge retention and chip evacuation while reducing galling
BulletPoint3 : Split geometry makes the tool as rigid as possible
BulletPoint4 : Corner radius profile
BulletPoint5 : Lockdown flat automatically locates tool on center
CuttingAngleString : 120.0 degrees
ExternallyAssignedProductIdentifier1 : 728709109038
ExternallyAssignedProductIdentifier2 : 0728709109038
ExternallyAssignedProductIdentifier3 : 00728709109038
IncludedComponents : 1pcs boring bar & 10 pcs carbide inserts
ItemName : Micro 100 BB-2001200 Boring Tool - Right Hand, .216" Min Bore Dia, 1.200" Max Bore Depth, .050" Proj, .075" Offset, .006" Corner Rad, .006" Radius, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
ItemPackageDimensions_Height : 0.762 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 1.016 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boring-bars
Manufacturer : Micro 100 Tool Corporation
Material : Solid Carbide
ModelNumber : BB-2001200
NumberOfItems : 1
PartNumber : BB-2001200
Pattern : 16"L x 0.200" (5.15mm) Dia.
ProductDescription : Use to extract cores of wood from trees or freshly treated poles, piling, lumber, or timbers to determine growth rate, age, tree soundness, and chemical penetration. Teflon coating protects bit against rust and resin build-up and reduces friction. How to select the correct Increment Borer for your needs. Three factors to consider when ordering an increment borer are bit length, core diameter and thread style. Borer Bit Length depends on the size of the trees you will be boring. Length is measured from the tip of the threads to the end of the round section of the borer bit. This is the maximum depth the bit will penetrate. Core Diameter of the wood sample is determined by the inside diameter of the opening at the threaded end of the bit. 0.169” is commonly used for general forestry use, 0.200” for wood preserving testing and 0.500” for large amounts of wood for qualitative analysis. 2- or 3-Thread style is a matter of personal preference. A 2-thread borer has two threads on the cutting edge of the bit, each originating 180° apart. A 3-thread borer has three threads, each originating 120° apart. The higher thread pitch of the 3-thread borer will penetrate deeper per revolution than a 2-thread. A 3-thread will also produce less friction because more steel is in contact with the wood. The ease at which a borer penetrates wood depends on wood hardness, friction properties and capability/strength of the user.
ProductSiteLaunchDate : 2013-03-20T16:18:05.251Z
Size : S25S-SVXCR16
StreetDate : 2017-11-25T00:00:01Z
Style : Radius
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 23241601