Cart 2 india

Specification
AutofocusTechnology : Contrast Detection
Brand : CHICIRIS
BulletPoint1 : 【Function】 The receiver has a built in induction coil to receive the magnetic from the pipe, and the coil generates an induced current to calculate the orientation and position of the transmitter
BulletPoint2 : 【Easy to Use】 Using the 512Hz transmitter, the position of the probe can be easily determined. Save time and money
BulletPoint3 : 【Design】 This pipeline detection locator is equipped with an LED display screen. You can see the monitoring data more clearly and convenient
BulletPoint4 : 【Widely Used】 Great for water supply pipelines, cable pipelines, pipeline vacuum systems, industry pipelines, underground pipeline construction, underground cave exploration, underwater research
BulletPoint5 : 【What You Get】 1 x Endoscope Monitor - 1 x Receiver - 1 x Manual - 1 x Aluminum Case
CameraFlash : Built-In
ConnectivityTechnology : USB
ExternallyAssignedProductIdentifier : 7087303978345
FileFormat : AVI
FormFactor : Ultracompact
HardwareInterface : usb
IncludedFlashType : Internal
Ingredients : default
ItemName : Sewer Camera Locator, Handheld Pipe Inspection Camera Receiver Industrial Borescope Endoscope with LCD Screen, 512HZ
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 36 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : borescopes
Manufacturer : CHICIRIS
MaxFocalLength : 16 millimeters
ModelName : CL 4010
ModelNumber : Akozonsasd2ea783
NumberOfItems : 1
PartNumber : CHICIRISdihc0by293686
ProductDescription : Specification
Item Type: Sewer Camera Locator
Material: ABS
Gross Weight: 2049g / 72.3oz
Working Frequency: 512Hz
Modulation: None
Batteries: 6 AA alkaline batteries (shipped without batteries)
Use Time: 4 hours intermittent use
Audio Output: 50-1000Hz depends on strength
Operating Temperature: -20°C to 60°C
Product Size: 548x65x50mm / 21.6x2.6x2.0in
Sensor: Separate angle sensor for peak and 0

General layout
1.Power on and off (long press to power on; long press to power off)
2.A near or far switch controls overall sensitivity. The far position is recommended when starting to position the probe. When you are close to the transmitter and the meter goes to full scale and you cannot desensitize any further, switch to Near to pinpoint its location.
3.Meter Indicators: Indicates the strength of the peak (right) and 0 (left).
4.Speaker: Allows you to hear the transmitter's beeps or continuous sound, depending on the transmitter use case.
5.Battery Indicator: Displays battery health status.
6.Instructions for use: Adjust the locator near or far switch and + or ‑ according to the actual environment to make the locator better match the transmitter.
7.It is recommended to set to Far mode ( is set to 9) at the beginning. When the LED screen shows that the is very strong, reduce the sensitivity level (you can hear a louder sound at the same time), and then you can narrow the detection range.

Package List
1 x Host
1 x Receiver
1 x Manual
1 x Aluminum Case

ProductSiteLaunchDate : 2022-05-31T08:59:12.236Z
SpecificUsesForProduct : default
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
VideoCaptureResolution : 720p
WaterResistanceLevel : waterproof
WirelessCommunicationTechnology : Wi-Fi