Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Aventor
BulletPoint1 : MFG SKU#: 303-3026
BulletPoint2 : Minimum Measuring Range: 1.968", 50mm
BulletPoint3 : Maximum Measuring Range: 2.48", 63mm
BulletPoint4 : Resolution: 0.00005"/0.001mm; Accuracy: ±0.0002"/0.005mm
BulletPoint5 : Repeatability: 0.00005“/0.001mm; Setting Ring: 2.44094
BulletPoint6 : Contact Points: 3; Bore Depth: 5
Color : Pink
ExternallyAssignedProductIdentifier : 9435644084979
ExternallyAssignedProductIdentifier1 : 0000230330267
ExternallyAssignedProductIdentifier2 : 000230330267
IncludedComponents : Setting Ring, Extension Rod, User Manual, Inspection Report, CR2450 Battery
ItemName : Aventor 1.968-2.480" Electronic 3 Point Snap Bore Gage ±0.0002"/0.005mm Accuracy 303-3026 R]
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bore-measurement-gauges
Manufacturer : Aventor
Material1 : Acrylonitrile Butadiene Styrene (ABS)
Material2 : Stainless Steel
MeasurementAccuracy : ±0.0002"/0.005mm
ModelName : WALFRONTw7kh26dmny
ModelNumber : 303-3026
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 303-3026
ProductDescription : [Thick and sturdy design] The gauge is thick and sturdy, ensuring it does not easily deform and providing highmeasurements
[Portable and convenient] Small in size and easy to carry, allowing you to keep it in your bag for on-the- welding inspections
[ stainless steel] Made of and rust-resistant stainless steel for reliable performance
[Clearly marked graduation] The graduation markings are clearly displayed for convenient and accurate reading
[Versatile use] for welding inspection, this tool checks undercut, crown height, and porosity

Spec:

Features:
This gauge is made of stainless steel, and rust-resistant.
Thick and sturdy gauge is not easy to deform, with high .
The graduation are clearly marked for convenient reading.
Small size and easy to carry, you can simply keep it in your bag.
It is convenient to use and great for welding inspection, used to checks undercut, crown height, porosity.
Specifications:
Material: Stainless steel
Measuring Range:0~1/4in; 1/16in; 1/8in(POR); 1/16in(POR)
Weight: 43g(approx.)
Package Includes:
1 x Welding Gauge




ProductDescription1 : Calibration Procedures: Step 1: Before dropping the bore gage into a master ring gage, press and hold the Preset key to go into the Preset mode with the P flashing. Step 2: press and hold the preset key to toggle between each digit to set the preset value to be master ring gage’s value. When the preset value is set, move back to flashing P and short press the preset key to exist the preset mode. Step 3: drop the bore gage into the master ring gage and make sure the jaws are in fully contact with the ring gage. While the bore gage is inside the ring gage, press the CAL key to set the current position to be master ring gage's bore diameter. Now the bore gage can be used as absolute measurement gage to check the absolute bore diameter of a workpiece's bore
ProductDescription2 : Relative Measurement Mode: Before dropping the bore gage into a master ring gage, use the Preset key to set the preset value to 0. Next drop the bore gage into the master ring gage and make sure the jaws are in fully contact with the ring gage. While the bore gage is inside the master ring gage, press the CAL key to set the current position to be 0. Now the bore gage can be used as relative measurement gage to check the bore diameter of a workpiece' against the master ring gage.
ProductDescription3 : Origin point can be set and retained to display the spindle's absolute true coordinate from the origin point for the entire battery life cycle. Once the the origin point is set, there are no needs to repeatedly perform a zero setting operation at power-on which allows quick and easy ready-to-use operation when taking multiple point measurement.
ProductDescription4 : Advanced encoder design eliminates overspeed travel errors ; The HOLD function key freezes the reading on the screen to help retaining measurment
ProductDescription5 : Jaw's openning/closing movement can be easily toggled by setting the positive/negative count (+/-) key. When the jaw opens at maximum position, the indicator should read the maximum measurement, otherwise use the +/- key to change the direction of measurement. ; Preset function key allows indicator to preset to any choosen coordinates by pressing the Preset key to enter into the Preset mode and press preset key to adjust the value on each decimal places
ProductSiteLaunchDate : 2024-10-25T18:48:09.801Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41111600