Cart 2 india

Specification
AudioOutputMode : Stereo
Brand : Taidacent
BulletPoint : 149309742
BulletPoint1 : Developed based on the Airoha AB1611 chip
BulletPoint2 : it can be used for smart lights, smart sockets, smart air conditioners and other smart appliances.
BulletPoint3 : it conforms to BLE5.0 and SIG Mesh specifications.
BulletPoint4 : It can directly pass through the Mesh network of smart phone components, and can also be connected to smart speakers
BulletPoint5 : Support: Windows 7,8.1,10/Linux/ Android
CompatibleDevices : Smartphone
CompatibleDevices1 : Laptop
CompatibleDevices2 : Desktop
ConnectivityProtocol : Bluetooth
ConnectivityTechnology : USB
ControlMethod : application
DataLinkProtocol : Bluetooth
DataTransferRate : 867 megabits_per_second
ExternallyAssignedProductIdentifier : 4943563197724
ExternallyAssignedProductIdentifier1 : 0795749937372
ExternallyAssignedProductIdentifier2 : 795749937372
HardwareInterface : bluetooth
HardwareInterface1 : usb
HardwareInterface2 : bluetooth
Hazmat1 : 84-71-90-0-0
IsWaterproof : FALSE
ItemName : Taidacent Bluetooth BT 5.0 Audio Module DIY Low Power Mesh Network Module Bluetooth Sig Mesh Network for Smart Home Application Phone
ItemPackageDimensions_Height : 19 inches
ItemPackageDimensions_Length : 7.56 inches
ItemPackageDimensions_Width : 14 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bluetooth-network-adapters
Manufacturer : Taida
ModelName : JX985A
ModelNumber : 0789649734568
MountingType : Tabletop Mount
PartNumber : QUBSIG35C
PowerSourceType : Corded Electric
ProductDescription : Developed based on the Airoha AB1611 chip, it can be used for smart lights, smart sockets, smart air conditioners and other smart appliances. At the same time, it conforms to BLE5.0 and SIG Mesh specifications. It can directly pass through the Mesh network of smart phone components, and can also be connected to smart speakers such as Tmall Genie and Xiaoai classmates, which is suitable for various smart home application scenarios.
Antenna layout requirements
(1) For the installation position on the motherboard, the following two methods are recommended:
Solution 1: Place the module on the edge of the motherboard, and the antenna area extends beyond the edge of the motherboard.
Solution 2: Place the module on the edge of the motherboard, and the edge of the motherboard hollows out an area at the antenna position.
(2) In order to meet the performance of the on-board antenna, it is prohibited to place high-frequency devices or metal parts around the antenna.
Voltage supply
(1) Recommended 3.3V voltage, peak current above 100mA
(2) It is recommended to use LD0 power supply; if using DC-DC, it is recommended to control the ripple within 30mV.
(3) The DC-DC power supply circuit is recommended to reserve the position of the dynamic response capacitor, which can optimize the output ripple when the load changes greatly.
(4) 3.3V power interface is recommended to add ESD devices.

ProductSiteLaunchDate : 2020-01-03T08:00:00.000Z
RecommendedUsesForProduct : For Bluetooth-enabled Devices (Smartphones, Tablets, Computers, Music Players)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43000000
WarrantyType : Limited
WirelessCommunicationTechnology : Bluetooth