Cart 2 india

Specification
Brand : Mini Blade Fuses 20A 32V
BulletPoint1 : AQUA-RITE Circuit Board Repair Item
BulletPoint2 : Mini Blade Fuses
BulletPoint3 : Auto, Marine or Electronics application up to 32 Vdc
BulletPoint4 : All Bussmann series blade fuses meet or exceed OEM and SAE standards.
BulletPoint5 : Meets or exceeds Original Equipment and SAE standards
Color : Orange
ExternallyAssignedProductIdentifier : 6930148978111
ExternallyAssignedProductIdentifier1 : 725185115133
ExternallyAssignedProductIdentifier2 : 0725185115133
ExternallyAssignedProductIdentifier3 : 00051712703291
GpsrSafetyAttestation : 1
IncludedComponents : (5) blade fuses
ItemName : FUSES Aqua-RITE 20A 32V Mini BladeFuses (5 Pcs)
ItemPackageDimensions_Height : 4.318 centimeters
ItemPackageDimensions_Length : 2.286 centimeters
ItemPackageDimensions_Width : 3.556 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : blade-fuses
Manufacturer : STI
Material : Copper
Material1 : Copper
Material2 : Plastic
Material3 : Ceramic
MaximumCurrent : 20 amps
ModelNumber : MBF20-32
MountingType : Through-Hole Mount
NumberOfItems : 1
PackageLevel : unit
PartNumber : MBF20-32
ProductDescription : AQUA-RITE Circuit Board Repair Item ( 5 Mini Blade Fuses, 20 Amp, 32 Volt) (One Fuse used on PCB) The first thing to check when you have a circuit board failure!! It is possible the fuse may blow before the Thermistor or Varistors fail. Check your fuse first, then check for Thermistor ( Ametherm SL32 2R025) failure and then check for failure of the 2 Varistors (Littelfuse V150LA2P). Please note the Common Failure Modes for this circuit board: HAYWARD / GOLDLINE / AQUA-RITE GLX-PCB-RITE This board failure is often due to the "sacrificial" destruction of the fuse, or the thermistor and/or varistors used to protect the circuit from high voltage and high current surges that could occur after a lighting strike during thunderstorms or other power surge. Normally the thermistor protects the circuit on start-up, providing a relatively high resistance (2 Ohm) at ambient temperature to limit "InRush Current", and then essentially disappearing from the circuit (0.02 ohm) when the current is near or equal the design current of 25 Amp. The part will fail when a power surge is much greater than the power handling capability of the part. The correct replacement thermistor is: Ametherm ICL - SL32 2R025 Inrush Current Limiting (ICL) Thermistor (1 Thermistor used) Board also uses: 2 VARISTORS (V150LA2P) Varistors are used to "CLAMP" the incoming Voltage as a second protection device. The Aqua-Rite Unit uses 2 LittleFuse V150LA2P Varistors (Use to repair: Hayward Aqua Rite PCB (GLX-PCB-RITE) Pool Chlor
ProductSiteLaunchDate : 2016-07-01T07:00:00.000Z
SpecificationMet : UL
SpecificationMet1 : RoHS
SpecificationMet2 : UL
SpecificationMet3 : SAE J1171
SpecificationMet4 : SAE J1284
StreetDate : 2017-07-21T00:00:01Z
Style : MidBlade (ATO/ATC Kit)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121600
Voltage : 32 volts
Voltage1 : 10 volts
Voltage2 : 32 volts