Cart 2 india

Specification
Brand : Stylebest
BulletPoint : Color: Ai100
BulletPoint1 : Process of fingerprint identification, the newly extracted fingerprint feature value is successfully identified and then merged into the fingerprint database, so that the user can use it in the process as better as possible.
BulletPoint2 : 360° automatic correction and recognition, press the correctly registered finger at any angle on the module, the pair is successful, and you can pass.
BulletPoint3 : The fingerprint recognition rate is low, the maximum is 0.001%, and the false rejection rate (FRR) is less than 0.001%.
BulletPoint4 : USB model, supports up to 1000 fingerprint users. The fingerprint window adopts waterproof technology.
BulletPoint5 : Support the full range of windows. Support the secondary development of for Android . Communication interface includes UART, 3.3V‑TTL level or USB communication.
Color : #011
ConnectivityTechnology : Wireless
ExternallyAssignedProductIdentifier1 : 037166057883
ExternallyAssignedProductIdentifier2 : 0037166057883
IncludedComponents : No
ItemName : Stylebest USB Optical Fingerprint Reader, Biometric Modular Scanner Sensor for Access Control on Windows
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : biometric-security-devices
ItemTypeName : Biometrics
Manufacturer : Stylebest
Material : Copper
MemoryStorageCapacity : 1 GB
ModelName : Stylebestio5zca10r9
ModelNumber : Stylebestio5zca10r9
NumberOfBoxes : 1
NumberOfChannels : 1
NumberOfItems : 1
PartNumber : Stylebestio5zca10r9
PowerSourceType : AC/DC
ProductDescription : Spec:
Item Type: Optical Fingerprint Reader
Material: ABS
Main Frequency: 120MHz
Flash Memory: 1M Bits
SRAM: 128KB
Fingerprint Collector: Optical acquisition
Fingerprint Image Size: 640 x 480(pixel), 508DPI
Fingerprint Registration Capacity: 1000 PCS by default
Fake Recognition Rate (FAR): < 0.001%
Rejection Rate (FRR): < 0.001%
Comparison Method:1 : N and 1 : 1 comparison
Fingerprint Template Size: 570 bytes
Safety Level Setting: Level 1 to Level 5 can be set
Factory Setting Value:Level 3
Communication Interface: UART, 3.3V-TTL level or USB communication
Serial Communication Parameter
Parity None: 1PC Stop Bit
Baud Rate: 9600, 19200, 38400, 57600, 115200(BPS)
Factory Setting: 115200BPS
Operating Voltage DC 3.3V ± 10%
Pin Functions:
RST: Reset module, low level is active
VIN: Main power supply of fingerprint module, 3.3V by default
Power Ground: GND
RX: Module receives data pins
TX: Module sends data pins
Finger Detection Function Circuit Power Supply: 3.3V
Wakeup: Finger detection function outputs pin, outputs high level when a finger is pressed on

How to Use:
It needs to be used by professional and technical personnel. One end of USB interface is connected to the module and the other end is connected to the computer. For Android can be used for secondary development.

packing list:
1 x Optical Fingerprint Reader
1 x USB Cable

Notice:
Professional use, do not understand this knowledge, please choose carefully.

ProductSiteLaunchDate : 2024-07-02T09:33:33.942Z
VideoCaptureResolution1 : 720p
VideoCaptureResolution2 : 1