Cart 2 india

Specification
Brand : ELILANEY
BulletPoint1 : Metal Dual Shaft Gearbox Static Modify DIY Mini Tank Model Micro Differential Excavator Truck Steering Gear Box
BulletPoint2 : Feature: The 90 degree right angle gearbox implements right angle turns and corner steering mechanisms in various equipment setups
BulletPoint3 : Usage: It enables smooth rotation and torque transfer between components for seamless functionality and is suitable for simple DIY mechanical applications
BulletPoint4 : Feature: The 90 degree right angle gearbox implements right angle turns and corner steering mechanisms in various equipment setups
BulletPoint5 : Usage: It enables smooth rotation and torque transfer between components for seamless functionality and is suitable for simple DIY mechanical applications
Color : One Color
ItemName : Angle Steering Metal Dual Shaft Gearbox Static Modify DIY Mini Tank Model Micro Differential Excavator Truck Steering Gear Box Driving Change
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bevel-gears
Manufacturer : ELILANEY
ModelNumber : NYCQCQQBN
NumberOfItems : 1
PartNumber : NYCQCQQBN
ProductDescription : Note: The delivery is accessories, you need to assemble it yourself

Points to pay attention to in the process:
1. Where the bevel gear is connected to the shaft, polish the shaft, the jacking wire is not easy to slip after fixing, and the jacking wire can also be fixed and seal the jacking
2. After the differential parts on both sides of the gearbox are assembled, use a hand drill or other means to drive the shaft to rotate smoothly. Let's take the next step.
3. Assemble the differentials on both sides of the gearbox: if the riveted small bevel tooth part is protruding, it can be punched with sandpaper, or a 2mm drill bit to ream.
4. The fixation of the big gear of the differential on both sides and the copper frame, and the fixation of the 8 bearings: it can be fixed, or the outside by adding a cover plate.
5.The two input shafts can be connected to own motor with 2mm fixed coupling.

Deficiencies:
1. Due to the small thickness of the bearing, there will be some shaking of the input shaft and output shaft, and a fixed bearing should be added to the middle part of the input shaft, or a section of 2mm inner diameter copper tube should be added, or there are other ways to fix it.
2. The gearbox itself should be fixed with the body by itself, and it should be determined by drilling holes or glue or other methods, depending on its own use environment.
ProductSiteLaunchDate : 2025-03-25T01:59:03.143Z
Size : One Size
UnitCount : 1
UnspscCode : 31171700