Cart 2 india

Specification
Brand : MroMax
BulletPoint1 : 【Dimension】 Expand Length: 1800mm/70.87"; Material Width:19mm/0.75"; Material Thickness:1mm/0.04";Spring Outer Diameter: 67mm/2.64".
BulletPoint2 : 【Reasonable Mount Design】Inner mounting type: hole; Outer mounting type: encircle.
BulletPoint3 : 【Fine Craftsmanships】This drill press spring is chemical blackening, the surface forms oxide film, isolate the air, rust-proof.
BulletPoint4 : 【Easy Installation】Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the drill press spring with a fixed wire directly into the spring seat, and the wire will slide out.
BulletPoint5 : 【Wide Applications】The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
Color : 1piece
DrillType : drill_press
ExternallyAssignedProductIdentifier : 6218911725644
GpsrSafetyAttestation : 1
IncludedComponents : Drill Press Spring
IsElectric : 1
ItemName : MroMax 1Pcs Drill Press Spring, 0.04" x 0.75" x 70.87" Quill Spring Feed Return Coil Spring Assembly, 1 x 19 x 1800mm Drill Press Spring Spring Steel Chemical Blackening Finish
ItemPackageDimensions_Height : 15.9 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 14.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-benchtop-drill-presses
Manufacturer : MroMax
Material : Spring Steel
ModelNumber : MRO190910S-0112
PartNumber : MRO190910S-0112
PowerSourceType : Wind Powered
ProductDescription :
MroMax Drill Press Spring

Specification:
Material: Spring Steel (60Si2Mn)
Material Thickness: 1mm/0.04"
Material Width: 19mm/0.75"
Expand Length: 1800mm/70.87"
Spring outer diameter: 67mm/2.64"
Inner Mounting Type : Hook
Outer Mounting Type : Hook
Surface treatment:No Special Treatment,Chemically Blackened

Description:
1. The sleeve return spring of the drilling machine is a good substitute for many existing sleeve spring drilling machines. This is a chrome-plated spring that can return the sleeve to the top after the drilling is completed.
2. Pay attention to the chemical blackening, the product performance forms an oxide film, isolates the air, and prevents rust.
3. Pay attention to safety when installing the spring. Do not loosen the wire holding the spring! When installing, directly load the spring with the fixed wire into the spring, and the wire will slide out.

Package content:
1PCS x Drill Press Spring
ProductSiteLaunchDate : 2019-10-23T05:58:04.414Z
Size : 1 x 19 x 1800mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 24101600
Voltage : 12 volts