Cart 2 india

Specification
Amperage : 3 amps
Brand : CheriMuMu
BulletPoint1 : 【High Quality】The mini benchtop drill press adopts full copper wire motor and cast iron base. The breakage rate of the drill bit is low, and the whole machine runs smoothly and has a long service life.
BulletPoint2 : 【Easy to Operate】The desktop design and the way of pushing the handle for operation are more time-saving and labor-saving. It is easier to operate than hand-held drills.
BulletPoint3 : 【Three Speed Adjustable】Benchtop drill press has speed regulation function, the first gear is 1800 -8000r/min, the second gear is 2200 -10000r/min, and the last gear is 2600 -12000r/min. . It allows you to operate at a suitable and precise speed, which is more efficient and accurate.
BulletPoint4 : 【Wide Applicability】Benchtop drill press is mainly used for commercial use, such as drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials in the market. It can also be used for home use, such as DIY or installing furniture, etc.
BulletPoint5 : 【Easy to Install】We are equipped with detailed instructions for installation and use. The package is also equipped with a complete set of parts. You only need the installation instructions step by step to complete the installation.
Color : Black
DrillType : basic_drill
ExternallyAssignedProductIdentifier : 7423419493677
ExternallyAssignedProductIdentifier1 : 0724443747192
ExternallyAssignedProductIdentifier2 : 724443747192
FinishType : Chrome
IncludedComponents : 1*Host
IsElectric : 1
ItemName : CheriMuMu Benchtop Drill Press, 3-Speed Bench Small Benchtop Drill Machine Portable Electric Mini Drill Press, Woodworking Metal Drilling Machine for DIY Creation 1-10mm 340W
ItemPackageDimensions_Height : 7.5 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 5.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-benchtop-drill-presses
Manufacturer : CHERIMUMU
Material : cast iron
MaximumChuckSize : 43 millimeters
MaximumPower : 340 watts
MaximumRotationalSpeed : 12000 rpm
ModelName : Benchtop Drill Press
ModelNumber : A1
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfSpeeds : 3
PartNumber : Tyenaza3gcwkndusq
PowerSourceType : Corded Electric
ProductDescription :

Description

The entire body of this mini benchtop drill press is made of high-quality materials. The breakage rate of the drill bit is extremely low. It uses a full copper wire motor and a cast iron base, which makes the whole machine run smoothly. It is easier to operate than handheld drills. It is mainly used for drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials.

 

Application

It is mainly used for commercial use, such as drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials in the market. It can also be used for home use, such as DIY or installing furniture, etc.

 

Specification

Clamp Diameter: 0.1-1cm

Rated Input Power: 340W

Voltage: 110V AC

Rated Frequency: 60Hz

Downfeed Travel: 4cm/1.57inch

No-load Speed（RPM):

I:1800 -8000r/min

II:2200 -10000r/min

III:2600 -12000r/min

Max Stroke: 2.5cm / 0.98inch

Table Top Size: Approx 17 x 17 x 38cm / 6.69 x 6.69 x 14.96inch

Weight: Approx 5.542kg/12.22lbs

 

Package Included

1*Host 

1* Collet key 

2* Allen wrench 

1 Pair of Carbon Brushes 

1*Belt

1*English Manual

Notes

1. Please read the user manual carefully before use and pay special attention to the safety precautions included.

2. Please refer to the speed listed in the description. Please allow a slight color difference due to shooting light, and a 1-3cm error due to manual measurement, please make sure you don't mind before ordering.

ProductSiteLaunchDate : 2023-10-05T19:44:11.958Z
Size : 6.69 x 6.69 x 14.96inch
Speed : 16000 rpm
Style : Modern Benchtop Drill Press
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts