Cart 2 india

Specification
Brand : VERIMP
BulletPoint1 : The hand-cranked centrifugal turntable is a simple manual power machine, and it can be used to drive most experiments. When it is erected, it can be used to drive small AC and DC generators or for experiments such as seven-color panels.
BulletPoint2 : When lying horizontally, it can be used for experiments such as centrifugal speed controller, centrifugal ball, centrifugal ring, centrifugal liquid separator, pronunciation gear and so on.
BulletPoint3 : A-shaped machine base, with other components mounted on the machine base, the shaft hole on the driven wheel shaft and the attached brake screw are used to assemble various centrifuge machines. Demonstration of centrifugal governor (throttle) speed regulator is used for positioning and throttling.
BulletPoint4 : Suitable for school teaching tools, learning displays and collections, it will also be an important supplement to your laboratory supplies.
BulletPoint5 : If you have any questions, please write to us and we will answer your questions within 24 hours!
Color : One Color
ExternallyAssignedProductIdentifier : 8255401039919
ItemName : VERIMP Physical Instruments, Teaching Instruments Hand-cranked Centrifugal Turntable Instrument - Physics Experiment Equipment
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-benchtop-centrifuges
Manufacturer : VERIMP
MetalType : other
ModelNumber : VERIMP
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : VERIMP
ProductDescription : Use:The hand-cranked centrifugal turntable is a simple manual power machine, and it can be used to drive most experiments. When it is erected, it can be used to drive small AC and DC generators, or for experiments such as seven-color panels. When lying horizontally, it can be used for experiments such as centrifugal speed controllers, centrifugal balls, centrifugal rings, centrifugal separators, and pronunciation gears.Structure:As shown in the figure, the A-shaped machine base is equipped with other components. The shaft hole on the driven wheel shaft and the attached brake screw are used to assemble various centrifuge machines. Detachable for positioning throttle valve during demonstration of centrifugal speed regulator.Use:1. According to the needs of use, the base can be horizontal or vertical.2. The tightness of the belt can be adjusted by the eccentric shaft. If it is found to be too loose, connect the belt again.3. When in use, check whether the screws and nuts are fastened to prevent loosening or slipping during rapid rotation and stable placement.Maintenance:1.The belt should not be too tight2. Fill the rotating part with a proper amount of lubricant for rust prevention and flexible rotation during use.
ProductSiteLaunchDate : 2024-05-20T07:54:57.649Z
Size : One Size
Style : Modern
UnitCount : 1