Cart 2 india

Specification
Brand : VAIDPRO
BulletPoint1 : 【Parameter】Time Rang: 0-60min; Maximum Relative Centrifugal Force: 2770×g; Maximum Speed: 4000r/min; Capacity: 50ml×8; Electric Current: AC110V 60Hz.
BulletPoint2 : 【Stability】High quality ABS engineering plastic casing and rotor ensure that the tubes rotate smoothly and safely and is not easily damaged. The top cover is transparent, not only can it reduce noise, but it also easy to detect the speed and status of the sample.
BulletPoint3 : 【High Efficency】The laboratory centrifuge has a maximum capacity of 50ml x 8 holes at a time. Note: The actual centrifugal capacity should not exceed 80% of the test tube capacity. Please put the tube containing the same amount of sample into the rotor symmetrically. If the sample is singular, please add a tube of clean water to achieve symmetrical operation.
BulletPoint4 : 【Speed Control & Timer】Our electric centrifuge machine design features two rotate knobs for speed and time adjustment. This benchtop centrifuges boasts a top speed of 4,000 revolutions per minute (rpm).
BulletPoint5 : 【Wide Applications】Lab benchtop centrifuges machine is equipped with laboratories, medical reseaech, university, cosmetic industries, food industries and so on. It is mainly used to separate the suspension of solid particles and liquid, or separate lotion in two different densities and mutually miscible liquids.
IncludedComponents : 1*Electric Centrifuge Machine, 1*Instructions
ItemName : VAIDPRO Electric Centrifuge Machine 50mlx8 Tube, 0-4000RPM Speed 2770xg RCF 0-60mins Timer, Benchtop Electric Lab Centrifuge Machine for PRP Plasma, Laboratory School Lab Medical Practice Hospital
ItemPackageDimensions_Height : 12.99 inches
ItemPackageDimensions_Length : 14.57 inches
ItemPackageDimensions_Width : 13.39 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-benchtop-centrifuges
Manufacturer : YN
ModelNumber : 07
NumberOfItems : 1
PartNumber : D0075C0007
ProductDescription :

VAIDPRO Electric Centrifuge Machine 50mlx8 Tube, 0-4000RPM Speed 2770xg RCF 0-60mins Timer, Desktop Benchtop Electric Lab Centrifuge Machine for PRP Plasma, Laboratory School Lab Medical Practice Hospital

LD-5 Electric centrifuge is a routine laboratory centrifuge, the instrument has the advantages of large capacity, low temperature, low noise, convenient operation and safe and reliable. Widely used in higher education, agricultural science and technology, petrochemical, bio chemical, health and epidemic prevention, life sciences, biological products, pharmaceutical research, environmental protection, and other major areas of experimental teaching use.

Specification:

Product Name: Electric Centrifuge Machine

Color: White&Blue

Material: ABS

Type: LD-5

Electric Current: AC110V 60Hz

Time Range: 0-60min

Maximum Relative Centrifugal Force: 2770xg

Max Speed: 4000r/min

Capacity: 50ml×8

Noise: ≤ 70db

Package Size: 37cm×34cm×33cm/14.57"×13.39"×12.99"

Package Weight: 9kg/19.84lb

Package Included:

1*Electric Centrifuge Machine

1*Instructions

LD-5 How To Use: 

1, Desktop electric centrifuge using three eye safety socket, before use should be the proper grounding work, should be placed in the machine smooth and solid surface. 

2, First check the timer knob, should be in the "0" position, and then connect the power supply, open the power switch, indicator light. 

LD-5 - The specific operation must be according to the following steps: 

A. Open the cover carefully, will be placed in the centrifugal protective tube. Note: The symmetry of the centrifugal protective tube sample must be put in the same weight, the weight deviation of not more than 1 gram. 

B. On the cover, adjust the speed to the lowest position. 

C. Turn on the power, the timer to spin. The time value, a timer from the "0" position, starts the turntable to rotate, from low speed to high speed gradually to the required speed of the centrifuge work. 

D. Work after a certain period of time, timer back to "0" position, the turntable stops rotating, the centrifuge stops working, adjust the speed to the lowest position. Desktop electric centrifuge after use, turn off the switch, the machine will be placed in dry, ventilated place, and keep it clean.

Note: 

1, The operation of the desktop electric centrifuge series excitation type motor, the brush is generally about 500 hours, and should be reversed in time, so as not to brush commutator wear after grinding.

2, Centrifuge table electric factory noise standard is lower than 70 dB (1 meter out centrifuge were measured in each group). 

3, Plastic tube weight deviation should be less than 0.2 grams, generally in the tube after damage, should be reversed by a group at the same time exchange or symmetrical with two roots together exchange method, in order to reduce the deviation phenomenon. 

4, In operation, two symmetrical glass tubes (including laboratory liquid) and weight The length should be equal, if the deviation is larger, it will produce shaking. 

5, The disc should avoid meeting strong acids, caustic, and corrosion. 

6, Table electric centrifuge as a whole product, should often pay attention to maintenance

ProductSiteLaunchDate : 2023-06-19T14:56:05.259Z
Size : 50mlx8 capacity
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41000000